Lights
The
proper working of
Safety chains
Be sure connected from the Leave enough
A
to the extent
as
transfe r some cargo to th e
requirements
and
The higher the the more
Be
Reduce speed shows the
some areas
speeds for are
The cooling effect of the radiator
fan cannot be increased by downshifting because fan speed is inde
pendent of engine speed. Therefore, when driving
---------DRIVING AND
You must depress the clutch pedal
the way before you can start the engine.
Always depress the clutch pedal fully when changing gears. Do not hold
the vehicle on a hill with the clutch pedal partially depressed. This may cause premature clutch wear or damage.
Resting your hand on the gearshift lever knob while driving will cause
premature wear in the transmission.
Drive in 6th gear for optimum fuel economy
when cruising. However,
if more accelera
tion is required (when passing, for exam
ple). shift down .
Gearshift pattern
press down and push forward. after driving forward. stop the ve
I .
-
B45-667K
High beam
The headlights work only when the ignition
is switched on.
The headlights stay on when you switch on
the high beam.
high beam with
high beam with reduced brightness.
High beam with brightness
Switching on:
With the headlights on. push the lever for
ward ( 4 ).
The blue indicator ligh t in the instrument
the lever (3 ) towards you.
High beam with reduced bright-
ness
With the headlights
will come on.
the switch (A ) qut to the second detent.
Switching off:
