Page 253 of 268
4RUNNER ()253
ÐFront fog lights
1. Loosen the cover retaining screws
and remove the cover.2. Lift up the soft casing and discon-nect the cords.3. Release the bulb retaining springand remove the bulb. Install a new
bulb and the bulb retaining spring.
To install the bulb, align the cutouts of the
bulb with the protrusions of the mounting
hole.
Page 254 of 268
4RUNNER ()
254
4. Connect the cord and put the soft casing into the cover.5. Install the cover with the retaining
screws.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.Use a Phillips- head screwdriver.
ÐParking and front side mark-
er lights
Page 255 of 268
4RUNNER ()255
ÐFront turn signal lights
Use a Phillips- head screwdriver.
ÐRear turn signal, stop and
tail, and back- up lights
Page 256 of 268
4RUNNER ()
256
a: Back- up light
b: Rear turn signal lights
c: Stop and tail light ÐLicense plate lightsUse a Phillips- head screwdriver
ÐHigh mounted stoplight
Use a Phillips- head screwdriver
Page 261 of 268