1999 LINCOLN CONTINENTAL garage door opener

ILLUMINATED VISOR MIRROR
To turn on the LH visor mirror
lamps, lift the mirror cover. Adjust
the amount of light by sliding the
control.
To turn on the RH visor mirror
lamps, lift the mirror cover.
HOMELINKTUNIVERSAL TRANSCEIVER (IF EQUIPPED)
The HomeLinktUniversal Transceiver, located on the driver's visor,
provides a convenient way to replace up to three hand-held transmitters
with a single built-in device. This feature will learn the radio frequency
codes of most current transmitters to operate garage doors, entry gates,
security systems, entry door locks, and home or office lighting.
When programming your HomeLinktUniversal Transceiver, to a
garage door or gate be sure that people and objects are out of
the way to prevent potential harm or damage.
Do not use the HomeLinktUniversal Transceiver with any garage door
opener that lacks safety stop and reverse features as required by U.S.
federal safety standards (this includes any garage door opener model
manufactured before April 1, 1982). A garage door which cannot detect
an object, signaling the door to stop and reverse, does not meet current
U.S. federal safety standards. For more information on this matter, call
toll-free: 1±800±355±3515 or on the Internet atHomeLink.jci.com.
Controls and features
67

To program your hand-held
transmitters:
²continue to hold the button on
the HomeLinktUniversal
Transceiver.
²press and re-press the hand-held
transmitter button every two
seconds until the red light changes from a slow to a fast flash.
Operating the HomeLinkTUniversal Transceiver
Once programmed, the HomeLinkt
Universal Transceiver can be used in
place of hand-held transmitters. To
operate, simply press and release
the appropriate HomeLinktbutton
(the red light will illuminate,
indicating the signal is being
transmitted).
Rolling code programming
Rolling code garage door openers (or other rolling code devices) which
are ªcode protectedº and manufactured after 1996, may be determined
by the following:
²Reference the device owner's manual for verification
²The hand-held transmitter appears to program the HomeLinkt
Universal Transceiver but does not activate the device.
²Press and hold the trained HomeLinktbutton. The device has the
rolling code feature if the indicator light flashes rapidly and then turns
solid after 2 seconds.
After completing the ªProgrammingº functions, follow these steps to
train a garage door opener with the rolling code feature:
1. Locate thetraining buttonon the garage door motor head unit.
Refer to the garage door opener manual or call 1±800±355±3515 or on
the Internet atHomeLink.jci.com.if there is difficulty locating the
training button.
2. Press the training button on the garage door motor head unit (which
will activate theªtrainingº light.)
Controls and features
69

3. Press and release the
programmed HomeLinktbutton.
Press and release the HomeLinkt
button asecond timeto complete
the training process. (Some garage
door openers may require this
procedure to be done a third time
to complete the training).
The 2nd or 3rd press from step 3 will activate the door. The HomeLinkt
Universal Transceiver has now been trained to the receiver. The
remaining two buttons may now be programmed if this has not
previously been done.
Erasing HomeLinkTbuttons
Individual buttons cannot be erased,
however, to erase the three
programmed buttons:
1. Hold down the two outside
buttons until the red light begins to
flash after 20 seconds.
2. Release both buttons.
Reprogramming a single HomeLinkTbutton
To program a device to HomeLinktusing a HomeLinktbutton previously
trained, follow these steps:
1. Press and hold the desired HomeLinktbutton.Do NOTrelease until
step 4has been completed.
2. When the indicator light begins to flash slowly (after 20 seconds),
position the hand-held transmitter 5±14 cm (2 to 5 inches) away from
the HomeLinktsurface.
3. Press and hold the hand-held transmitter button.
4. The HomeLinktindicator light will flash, first slowly and then rapidly.
When the indicator light begins to flash rapidly, release both buttons.
The previous device has now been erased and the new device can be
activated by pushing the HomeLinktbutton that has just been
programmed.
Controls and features
70

replacement/additional
transmitters ...............................84
replacing the batteries .............83
Safety belts
(see Safety restraints) .................9
Safety restraints
cleaning the safety
belts ..................................100,193
extension assembly ..................99
for children ......................108,109
lap belt ......................................98
warning light and chime .....9,100
Seat belts (see Safety
restraints) .....................95,96,97,98
Seats ............................................92
child safety seats ....................110
cleaning ............................193,194
Seats-easy access/easyout
feature .........................................95
Servicing your vehicle ..............152
Spark plugs, specifications .......195
Specification chart,
lubricants ...................................196
Speed control ..............................50
Speedometer ...............................11
Starting your vehicle .........115,117
jump starting ............146,147,149
Steering wheel ............................49
tilting .........................................53
Tachometer .................................11
Tires ...............168,169,170,171,172
changing ..................................142
checking the pressure ............172
replacing ..................................173rotating ....................................172
snow tires and chains ............174
tire grades ...............................172
treadwear ................................171
Towing
wrecker ....................................151
Transaxle
fluid, refill capacities ..............195
Transmission .............................162
fluid, checking and adding
(automatic) ......................162,163
Trunk ...........................................82
remote release lever .................77
Turn signal ..................................10
Universal transmitter
(see garage door opener) ....67,68,
69,70
Vehicle dimensions ...................197
Vehicle Identification Number
(VIN) ..........................................200
Vehicle loading .....130,132,133,134
Ventilating your vehicle ...........119
Warning chimes .............................6
Washer fluid ..............................158
Water, Driving through .............130
Wheels
anti-theft lug nuts ..................145
Windows .................................74,75
Windshield washer fluid and
wipers
checking and cleaning ............168
operation ...................................48
replacing wiper blades ...........168
Index
204