Page 56 of 432

SWITCHES
38
WINDSHIELD WIPER ANDWASHER SWITCH
To turn the wipers on, move the lever down. To make the
washer squirt, push the button on the end of the lever.
The ignition key must be in the ºONº position.
For mist wiper operation (a single wipe), pull the lever toward
you and release it.
The interval adjuster lets you adjust the wiping time interval
between wiper sweeps if the wiper lever is in the ºINTº
position. Tw ist the lever upward to increase the time between
sweeps, and downward to decrease it.
Also, the wipers will automatically operate a couple of times
after the washer squirts even with the lever in the ºOFFº
position. The low washer fluid warning light in the instrument cluster
comes on when the fluid level in the tank becomes nearly
empty. For information on adding washer fluid, see ºAdding
washer fluidº on page 396.
In cold weather, warm the windshield with the defroster
before using the washer. This will help prevent icing, which
could block your vision.
NOTICE
Do not operate the wipers if the windshield is dry. It may
scratch the glass.
Page 59 of 432
SWITCHES
41
To raise or lower the windows, use the switch on each door.
The passenger's window can also be controlled by the
switch on the driver's door.
The power windows work when the ignition key is in the
ºONº position.
Key off operation: Even if the ignition key is turned to the
ºACCº or ºLOCKº position, the window can be operated
until any of the doors is opened (or for about 60 seconds).
Page 60 of 432
SWITCHES
42
Operating the driver's switch
To raise or lower the windows, pull the switch halfway up
or push it halfway down.
Automatic operation: To fully lower the window
automatically, push the switch fully down.
To stop the window partway, lightly pull the switch in the
opposite direction and then release it.
Page 61 of 432
SWITCHES
43
Operating the passenger's switch
To lower the window, push the switch down. Pull it up to
raise the window. The window moves as long as the switch
is operated.
With the ºWINDOW LOCKº switch pressed in, only the
driver's window can be raised or lowered.
The indicator lights on the switch tell you which of the
switches can be operated.
Page 62 of 432
SWITCHES
44
CAUTION
To avoid serious personal injury, you must do the following.
Always make sure the head, hands and other parts of the
body of all occupants are kept completely inside the vehicle
before you close the power windows. If someone's neck,
head or hands gets caught in a closing window, it could
result in a serious injury. When anyone closes the power
windows, be sure that they operate the windows safely.
When small children are in the vehicle, never let
them use the power window switches without
supervision. Use the ºWINDOW LOCKº switch to
prevent them from making unexpected use of the
switches.
Never leave small children alone in the vehicle,
especially with the ignition key still inserted. They
could use the power window switches and get
trapped in a window. Unattended children can
become involved in serious accidents.EMERGENCY FLASHER
SWITCH
Page 65 of 432
SWITCHES
47
CAUTION
Occupants must use caution when operating the seat heater
because they may experience minor burns even at low
temperatures. Use extra caution for;
Baby, small child, elderly person, sick person or
handicapped person
Persons who have delicate skin
Persons who are exhausted
Persons who have taken alcohol or drugs which induce
sleep (sleeping drug, cold remedy, etc.).
To prevent the seat from overheating, do not use the seat
heater with a blanket, cushion, or other insulating objects
which cover the seat.
NOTICE
Do not put unevenly weighted objects on the seat and
do not stick sharp objects (needles, nails, etc.) into the
seat.
When cleaning the seats, do not use organic
substances (paint thinner, benzine, alcohol, gasoline,
etc.). They may damage the heater and seat surface.
To prevent the battery from being discharging, turn
the switches on when the engine is running.
Page 67 of 432
GAUGES, METERS AND SERVICE REMINDER INDICATORS
49
FUEL GAUGE
The gauge is displayed when the ignition switch is on and
indicates the approximate quantity of fuel remaining in
the tank.
It is a good idea to keep the tank over 1/4 full.
This fuel gauge has a non±return type needle which remains
at the last indicated position when the ignition switch is turned
off.
If the fuel level approaches ºEº or the low fuel level warning
light comes on, fill the fuel tank as soon as possible.
On inclines or curves, due to the movement of fuel in the tank,
the fuel gauge needle may fluctuate or the low fuel level
warning light may come on earlier than usual.
If the fuel tank is completely empty, the malfunction indicator
lamp comes on. Fill the fuel tank immediately.The indicator lamp goes off after driving several times. If the
indicator lamp does not go off, contact your Lexus dealer as
soon as possible.
See the inner back cover for fuel capacity and recommended
fuel selection.
Page 69 of 432
GAUGES, METERS AND SERVICE REMINDER INDICATORS
51
The gauge indicates the engine coolant temperature when
the ignition switch is on. The engine operating
temperature
will vary with changes in weather and engine
load.
If the needle points to the red zone or higher, stop your vehicle
and allow the engine to cool.
Your vehicle may overheat during severe operating
conditions, such as:
Driving up a long hill on a hot day.
Reducing speed or stopping after high speed driving.
Idling for a long period with the air conditioning on in
stop±and±go traffic.
Towing a trailer.
NOTICE
Do not remove the thermostat in the engine cooling
system as this may cause the engine to overheat. The
thermostat is designed to control the flow of coolant to
keep the temperature of the engine within the specified
operating range.
Do not continue driving with an overheated engine.
See ºIf your vehicle overheatsº on page 280.
TACHOMETER