Page 312 of 495
STARTING AND DRIVING
296In the power mode, the ºECT PWRº light in the
instrument cluster is on and the transmission is shifted
up at higher vehicle speeds and shifted down more
responsively than in the normal mode.
To return to the normal mode, push the driving pattern
selector switch lightly on the ºSNOWº side.
Snow mode: For slippery road surfaces such as in
snow. In this mode, the spinning of the rear wheels is
controlled appropriately.
When
you push the driving pattern selector switch on the
ºSNOWº side, the snow mode is turned on and the ºECT
SNOWº light in the instrument cluster comes on.
To return to the normal mode, push the driving pattern
selector switch on the ºSNOWº side again.
When you turn the ignition switch off in the snow mode,
the mode automatically changes to the normal mode.
Page 314 of 495
STARTING AND DRIVING
298
Turning on the system
31L067
To operate the cruise control, push the main switch. This
turns the system on. The indicator light in the instrument
cluster shows that you can now set your desired cruising
speed. Another push on the switch will turn the system
completely off.
When the ignition key is turned off, the main switch is
also automatically turned off. To use the cruise control
again, push the main switch again to turn it on.
CAUTION
To avoid accidental cruise control engagement, keep
the main switch off when not using the cruise control.
Page 317 of 495

STARTING AND DRIVING
301
Resuming the preset speed
If the preset speed is cancelled by pulling the control
lever or by depressing the brake pedal, pushing the lever
up in the ºRES/ACCº direction will restore the speed set
prior to cancellation. However, once the vehicle speed
falls below about 40 km/h (25 mph), the preset speed will
not be resumed.
Cruise control failure warning
If the ºCRUISEº indicator light in the instrument cluster
flashes when using the cruise control, push the main
switch to turn the system off and then push it again to
turn it on.
If any of the following conditions then occurs, there is
some trouble in the cruise control system.
The indicator light does not come on.
The indicator light flashes again.
The indicator light goes out after it comes on.
If this is the case, contact your Lexus dealer and have
your Lexus inspected.
ELECTRONICALLY
MODULATED AIR SUSPENSION
(U.S.A. ONLY)
This electronically modulated air suspension
adjusts the damping effect on the shock absorbers
and the vehicle height. This adjustment is
automatically made in response to the driving
conditions to provide good riding comfort and
stability in all driving conditions.
Page 417 of 495

ENGINE
401
Improved gasolines
The American Automobile Manufacturers
Association (AAMA) has developed a specification
of improved gasolines. The AAMA specification
offers optimal fuel information for better vehicle
performance and better protection of your engine.
Lexus recommends the use of gasolines that meet the
AAMA specification, if available, for improved drivability
and emission control system.
Gasolines containing MTBE
Gasolines that contain MTBE (Methyl T ertiary±Butyl
Ether) are available in the market. If you use a
gasoline mixed with MTBE, make certain that it does
not contain more than 15% of MTBE.
Gasolines containing MMT
Some gasolines contain an octane±enhancing
additive called MMT (methylcyclopentadienyl
manganese tricarbonyl).
Lexus does not recommend the use of gasolines that
contain MMT. If fuels containing MMT are used, your
emission control system may be adversely affected.
The Malfunction Indicator Lamp on the instrument
cluster may come on. If this happens, contact your
Lexus dealer for service.
Gasolines containing alcohol
Gasohol is a mixture of gasoline and ethanol. If you
use gasohol in your Lexus, be sure that it is
unleaded, has an octane rating no lower than 87 and
does not contain more than 10% ethanol. Lexus
does not recommend the use of gasolines
containing methanol.
If you use gasoline containing methanol, use only
gasoline meeting the requirements above and also
containing less than 5% methanol with cosolvents and
corrosion inhibitors for methanol.