Page 27 of 472
SECTION 1 ± 1
7
INSTRUMENTS AND CONTROLS
Keys and doors
Keys7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . .
Engine immobiliser system 12
. . . . . . . . . . . . . . . . . . . . . .
Wireless remote control transmitter 15
. . . . . . . . . . . . . . .
Doors 21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . .
KEYS
11L025-2
Page 28 of 472

KEYS AND DOORS
8
1Master key (black) ± The master key works in
every l ock. For your Lexus dealer to make you
a new key with built±in transponder chip, your
dealer will need it.
2 Subkey (gray) ± The subkey will not open the
trunk and the glovebox.
3Key number plate ± Keep the plate in a safe
place such as your wallet, not in the vehicle.
The master key and subkey each have a transponder
chip in their key head which is very important for the
immobiliser system function, so be careful not to lose
these keys. If you make your own duplicate key, you will
not be able to cancel the system or start the engine.
To protect things locked in the trunk or glovebox when
you have your vehicle parked, leave the subkey with the
attendant. Since
the doors and trunk lid can be locked without a key,
you should always carry a spare master key in case you
accidentally lock your keys inside the vehicle.
If you should lose your keys or if you need additional
keys, duplicates can be made by a Lexus dealer using
the key number.
We recommend you to write down the key number and
keep it in safe place.
11L003
Page 29 of 472
KEYS AND DOORS
9
Since a transponder chip is not built in this flat key,
you cannot start the engine with this key. Use this
key to release the lock in case you accidentally lock
your keys and wireless transmitter inside the
vehicle or trunk.
Insert your flat key in its key case as shown. We
recommend that you always carry this with you for
emergency use. Do not leave it in your vehicle.
NOTICE
Do not let the key case become bent as the key
may fall out or become bent also.
The flat key is designed for emergency useonly.
Page 30 of 472
KEYS AND DOORS
10
11L021-1
When using a key containing a transponder chip,observe the following precautions:
When starting the engine, do not use the keywith a key ring resting on the key grip and donot press the key ring against the key grip.Otherwise the engine may not start, or maystop soon after it starts.
Page 31 of 472
KEYS AND DOORS
11
11E016
When starting the engine, do not use the keywith other transponder keys around (includingkeys of other vehicles) and do not press otherkey plates against the key grip. Otherwise theengine may not start, or may stop soon after itstarts. If this happens, remove the key onceand then insert it again after taking off other
transponder keys (including keys of othervehicles) from the ring or while gripping orcovering them with your hand to start theengine.
Page 32 of 472
KEYS AND DOORS
12
11L023-2
Do not bend the key grip.
Do not cover the key grip with any material thatcuts off electromagnetic waves.
Do not knock the key hard against otherobjects.
Do not leave the key exposed to hightemperatures for a long period, such as on the
dashboard and hood under the direct sunlight.
Do not put the key in water or wash it in an
ultrasonic washer.
Do not use the key with electromagneticmaterials.
ENGINE IMMOBILISER SYSTEM
Page 34 of 472

KEYS AND DOORS
14The engine immobiliser system is a theft prevention
system. When you insert the key in the ignition
switch, the transponder chip in the key's head
transmits an electronic code to the vehicle. The
engine will start, only when the electronic code in
the chip corresponds to the registered ID code for
the vehicle.
The system is automatically set when the key is
removed from the ignition switch. At this time, the
security indicator light at the bottom of the instrument
cluster flashes. When you insert the key in the ignition
switch, the security indicator light goes out and the
system is canceled automatically, which enables the
engine to start.
For your Lexus dealer to make you a new key with
built±in
transponder chip, your dealer will need your key
number and master key. However, there is a limit to the
number of additional keys your Lexus dealer can make
for you. If you make your own duplicate key, you will not be
able to cancel the system or start the engine.
For vehicles sold in U.S.A.
FCC ID: MOZ RI±4ATY MADE IN JAPAN
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Page 50 of 472

SWITCHES
30The automatic light control sensor is on top of the
driver's side instrument panel.
Do not place anything on the instrument panel, and/or do
not affix anything on the windshield to block this sensor.
When the headlights come on, the lights automatically
turn off about 30 seconds after any of the doors is
opened and closed with the ignition key turned to the
ºACCº or ºLOCKº position. To turn them on again, turn
the ignition key to the ºONº position, or turn the headlight
switch off
and then twist the knob until the first or second
clickstop. If you are going to park for over one week,
make sure the headlight switch is off.
When the headlight switch is on with all the doors locked,
pushing the ºLOCKº button on the wireless remote
control transmitter turns off the headlights.
Daytime Running Light System
The headlights turn on at reduced intensity when the
parking brake is released with the engine started, even
with the light switch in the ºOFFº position. They will not
go off until the ignition switch is turned off.
To turn on the other exterior lights and instrument panel
lights, twist the knob to the first clickstop.
Twist the knob to the second clickstop to turn on the
headlights to full intensity for driving at night.
When setting the knob to the third clickstop (ºAUTOº),
the headlights will automatically adjust to full intensity
and/or turn on the other lights depending on the darkness of the surroundings. Likewise, as the
surroundings be
come brighter, the headlights will turn to
reduced intensity, ultimately turning off the other lights.
NOTICE
To prevent the battery from being discharged, do not leave the lights on longer than necessarywhen the engine is not running.