1999 FORD CROWN VICTORIA trunk

[x] Cancel search: trunk

Page 6 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual WARNING LIGHTS AND CHIMES
Standard instrument cluster
Optional instrument cluster
Low fuel
Illuminates as an early reminder of a
low fuel condition indicated on the
fuel gauge. The light comes on when

Page 12 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Optional instrument cluster gauges
Fuel gauge
Displays approximately how much fuel is in the fuel tank (when the key
is in the ON position). The fuel gauge may vary slightly when the vehicle
is in mot

Page 16 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Battery voltage gauge (if equipped)
This gauge shows the battery
voltage when the ignition is in the
ON position. If the pointer moves
and stays outside the normal
operating range (as indicated), have

Page 20 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual To reset either trip feature to zero,
press the RESET control while the
appropriate trip distance feature
(TRIP A or TRIP B) is displayed.
AVG SPEED (average speed)
Select this function to display you

Page 21 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Door ajar
Illuminates when one of the doors is
not completely shut and the ignition
is turned to ON. With the ignition
ON, this light will flash five times
and sound a tone for one second,
then remain

Page 61 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual ²NEWSЪvoice-onlyº type of sound with a limited audio band.
Press the DSP control until one of
the following appears:
²ALL SEATS
²DRIVER SEAT
²REAR SEATS
Use the SELECT control to change
the eq

Page 78 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual 2. Press and hold the COMP side of
the control for approximately six
seconds until ªCº appears in the
mirror display.
3. Drive the vehicle slowly (less
than 5 km/h [3 mph]) in circles or
on your eve

Page 84 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual You must complete steps 1-7 within 30 seconds or the procedure will
have to be repeated. If the procedure needs to be repeated, you must
wait 30 seconds.
1. Turn the ignition key to ON.
2. Press the p
Page:   1-8 9-16 next >