1999 FORD CROWN VICTORIA steering wheel

[x] Cancel search: steering wheel

Page 67 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual POSITIONS OF THE IGNITION
1. ACCESSORY, allows the electrical
accessories such as the radio to
operate while the engine is not
running.
2. LOCK, locks the steering wheel,
automatic transmission gearsh

Page 117 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual BRAKES
Your service brakes are self-adjusting. Refer to the scheduled
maintenance guide for scheduled maintenance.
Occasional brake noise is normal and often does not indicate a
performance concern wi

Page 121 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual The traction control indicator
flashes during a Traction Controly
system event.
If the traction control indicator
comes on and stays lit, either:
²the Traction Controlysystem
requires service, or
²t

Page 134 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause
severe wire damage and could start a fire.
Standard fuse amperage rating and

Page 138 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Fuse/Relay
LocationFuse Amp
RatingDescription
12 30A** PCM Power Relay, PCM, Natural Gas
Vehicle Module
13 50A** High Speed Cooling Fan Relay
14 40A** Rear Window Defrost Relay, Also see Fuse
17
15 50

Page 159 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual CHECKING AND ADDING POWER STEERING FLUID
Check the power steering fluid.
Refer to the Scheduled Maintenance
Guide for the service interval
schedules. If adding fluid is
necessary, use only MERCONtAT F

Page 207 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Radio ....34,35,36,37,38,39,40,41,42
43,44,45,46,47,48,49,50,51
52,53,54,55,56,57,58,59,60
Relays .................................133,138
Remote entry system ............81,84
illuminated entry .....