1999 FORD CROWN VICTORIA window

[x] Cancel search: window

Page 78 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual 2. Press and hold the COMP side of
the control for approximately six
seconds until ªCº appears in the
mirror display.
3. Drive the vehicle slowly (less
than 5 km/h [3 mph]) in circles or
on your eve

Page 79 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual ²Press the bottom portion of the
rocker switch to open.
Express down
²Press AUTO and release quickly.
The window will open fully.
Depress again to stop window
operation.
Window lock
The window lock

Page 116 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Guarding against exhaust fumes
Although odorless and colorless, carbon monoxide is present in exhaust
fumes. Take precautions to avoid its dangerous effects.
If you ever smell exhaust fumes of any kin

Page 135 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual The fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
RatingDescription
1 15A Brake Pedal Position (BPP) Switch,
Multi-Function Switch, Speed Control
2 30A Wiper Control Module, Windshield Wiper

Page 136 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Fuse/Relay
LocationFuse Amp
RatingDescription
9 30A Blower Motor, A/C-Heater Mode Switch
10 10A Air Bag Module
11 5A Radio
12 18A CB Lighting Control Module, Flash-to-Pass,
Main Light Switch
13 15A Wa

Page 138 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual Fuse/Relay
LocationFuse Amp
RatingDescription
12 30A** PCM Power Relay, PCM, Natural Gas
Vehicle Module
13 50A** High Speed Cooling Fan Relay
14 40A** Rear Window Defrost Relay, Also see Fuse
17
15 50

Page 176 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual ²Use recommended engine oil. Refer toLubricant Specifications.
²Perform all regularly scheduled maintenance items. Follow the
recommended maintenance schedule and owner maintenance checks
found in y

Page 181 of 208

FORD CROWN VICTORIA 1999 2.G Owners Manual High-mount brakelamp bulbs
1. Open trunk.
2. Inside trunk, locate access hole
under the rear window
3. Remove the bulb socket by
rotating it 45 degrees and pulling it
out of the lamp assembly.
4. Care
Page:   < prev 1-8 9-16 17-24 next >