1999 BUICK RIVIERA mirror

yellowblue
1-3 Memory Seat and Mirrors (Option)
The memory function controls the driver's seat cushion
and outside mirror positions. It does not store the lumbar
or recline positions.To set your memory seat and mirrors:
1. Adjust the driver's seat cushion to your desired
position. Adjust both outside mirrors to suit you. See
ªMirrorsº in the Index.
2. Press the SET button and then press the 1 or 2 side
of the MEMORY switch within five seconds. You
will hear one beep when you press the SET button
and two beeps when you press the MEMORY button
to confirm that the mirror and seat positions are
entered into memory.
When your vehicle is in PARK (P) with the ignition on
or off, press the same side of the MEMORY switch to
recall the seat and mirror setting.
To do the same thing for a second driver, follow the
preceding steps, but press the other side of the
MEMORY switch.
The EXIT button allows you to get out of the car easily.
When the gear shift selector is in PARK (P) with the
ignition on or off, push EXIT and the seat will go all the
way down and back.

yellowblue
1-4 Memory Seat and Mirrors Personal Choice
Feature (Option)
The remote keyless entry transmitters can also be
programmed to move the driver's seat and outside
mirrors to a set memory position when the transmitter's
UNLOCK button is pressed.
To program the system:
1. Adjust the driver's seat cushion to a comfortable
position. Adjust both outside mirrors to suit you. See
ªPower Remote Control Mirrorº in the Index.
2. Press the SET button on the driver's door armrest.
You will hear one beep.
3. Within five seconds, press one of the two memory
buttons on the armrest. You will hear two beeps to
confirm that the mirror and the seat positions are
entered into memory.
4. Press the UNLOCK button on the appropriate
transmitter within five seconds. You will hear
two beeps.The second transmitter can be programmed to record
a different seat and mirror position by following the
same steps.
If you prefer to program the exit seat position, which
moves the seat completely down and back, follow
these steps:
1. Press the SET button on the driver's door armrest.
You will hear one beep.
2. Press the EXIT button on the armrest. You will hear
one beep, but the seat will not move at this time.
3. Press the UNLOCK button on the appropriate
transmitter within five seconds. You will hear
two beeps.
This personal choice feature will work only when the
vehicle is in PARK (P). A beep will sound inside the
vehicle when the UNLOCK button on the transmitter is
pressed to move the seat and mirrors.
To turn this feature off, press SET and then UNLOCK
within five seconds.

2-
yellowblue
2-1
Section 2 Features and Controls
Here you can learn about the many standard and optional features on your vehicle, and information on starting,
shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is
working properly
-- and what to do if you have a problem.
2
-2 Keys
2
-4 Door Locks
2
-8 Remote Keyless Entry System
2
-13 Trunk
2
-14 Theft
2
-15 Universal Theft-Deterrent (Option)
2
-17 PASS-Key
II
2
-18 New Vehicle ªBreak-Inº
2
-19 Ignition Positions
2
-21 Starting Your Engine
2
-23 Engine Coolant Heater (Option)
2
-24 Automatic Transaxle Operation
2
-27 Parking Brake
2
-28 Shifting Into PARK (P)
2
-30 Shifting Out of PARK (P)
2
-31 Parking Over Things That Burn2
-32 Engine Exhaust
2
-32 Running Your Engine While You're Parked
2
-33 Windows
2
-34 Tilt Wheel
2
-35 Turn Signal/Multifunction Lever
2
-40 Exterior Lamps
2
-43 Interior Lamps
2
-46 Mirrors
2
-52 Storage Compartments
2
-58 Accessory Power Outlet
2
-58 OnStar
System (Option)
2
-60 Universal Transmitter (Option)
2
-64 The Instrument Panel - Your
Information System
2
-68 Warning Lights, Gages and Indicators

yellowblue
2-10
Remote Keyless Entry Personal Choice Features
The following list of features that are available on your
vehicle can be programmed to the driver's preference
for each transmitter.

Memory Seat and Mirrors: This feature programs
your driver's seat and outside mirrors to a set
memory position when the UNLOCK button on the
remote keyless entry transmitter is pressed.

Security Feedback: This feature provides feedback
to the driver when the vehicle receives a command
from the remote keyless entry transmitter.

Perimeter Lighting: When the UNLOCK button on
the transmitter is pressed, the headlamps, parking
lamps, back
-up lamps and cornering lamps will turn
on in dark conditions.

Memory Door Locks: This feature programs your
door locks to automatically lock or unlock when
shifting in and out of PARK (P).

Delayed Locking: This feature lets the driver delay
the actual locking of the vehicle. When both doors
have been closed, the doors will lock automatically
after five seconds.For more detailed information and programming
instructions, refer to the Index for each individual
feature listed above.
Security Feedback
This personal choice feature provides feedback to the
driver when the vehicle receives a command from the
remote keyless entry transmitter. The following modes
may be selected:
Mode 0: No response when locking or
unlocking vehicle.
Mode 1: No response when locking; headlamps, parking
lamps and cornering lamps (if equipped) flash when
unlocking vehicle.
Mode 2: Headlamps, parking lamps and cornering
lamps (if equipped) flash when locking; no response
when unlocking vehicle.
Mode 3: Headlamps, parking lamps and cornering
lamps (if equipped) flash when locking and when
unlocking vehicle.
Mode 4: Headlamps, parking lamps and cornering
lamps (if equipped) flash and horn chirps when locking;
no response when unlocking vehicle.

yellowblue
2-46
Mirrors
Inside Day/Night Rearview Mirror
When you are sitting in a comfortable driving position,
adjust the mirror so you can see clearly behind your
vehicle. Grip the mirror in the center to move it up or
down and side to side. The day/night adjustment allows
you to adjust the mirror to avoid glare from the lights
behind you. Pull the tab toward you for night use; push
it away from you for daytime use.
Electrochromic Day/Night Rearview Mirror
(Option)
Your vehicle may have an automatic electrochromic
day/night rearview mirror.
When this feature is turned on, the mirror automatically
changes to reduce glare from headlamps behind you. A
photocell on the mirror senses when it is becoming dark
outside. Another photocell built into the mirror face
senses when headlamps are behind you.
At night, when the glare is too high, the mirror will
gradually darken to reduce glare (this change may take a
few seconds). The mirror will return to its clear daytime
state when the glare is reduced.

yellowblue
2-47
Mirror Operation
To turn on the automatic dimming feature, press
AUTO. To turn off automatic dimming, press OFF.
The green indicator light will be illuminated when this
feature is active.
Time Delay
The automatic mirror has a time delay feature which
prevents unnecessary switching from the night back to
the day position. This delay prevents rapid changing of
the mirror as you drive under lights and through traffic.
Cleaning the Photocells
Use a cotton swab and glass cleaner to clean the
photocells when necessary.
Electrochromic Day/Night Rearview Mirror
with Compass (Option)
Your vehicle may have an electrochromic inside
rearview mirror with a compass.
When set in the MIRROR position, this mirror
automatically changes to reduce glare from headlamps
behind you. A time delay feature prevents rapid
changing from the day to night positions while driving
under lights and through traffic.
The mirror also includes an eight
-point compass display
in the upper right corner of the mirror face. When on,
the compass automatically calibrates as the vehicle
is driven.
When cleaning the mirror, use a paper towel or similar
material dampened with glass cleaner. Do not spray glass
cleaner directly on the mirror as that may cause the liquid
cleaner to enter the mirror housing. Use a cotton swab and
glass cleaner to clean the photocells when necessary.

yellowblue
2-48
Mirror Operation
The right side of the button located at the bottom of the
mirror turns the electrochromic mirror on and off. To
turn on the automatic dimming feature, press MIRROR.
To turn off automatic dimming, press MIRROR again.
The green indicator light will be illuminated when this
feature is active.
Compass Operation
Press the COMPASS button once to turn the compass on
or off.
When the ignition and the compass feature are on, the
compass will show two character boxes for
approximately two seconds. After two seconds, the
mirror will display the compass heading.If, after two seconds, the display does not show a
compass heading (ªNº for North, for example), there
may be a strong magnetic field interfering with the
compass. Such interference may be caused by a
magnetic antenna mount, magnetic note pad holder or a
similar magnetic item.
Compass Calibration
If the letter ªCº should ever appear in the compass
window, the mirror may need calibration.
The mirror can be calibrated in one of two ways:

Drive the vehicle in circles at 5 mph (8 km/h) or less
until the display reads a direction, or

Drive the vehicle on your everyday routine.
Compass Variance
The mirror is set in zone eight upon leaving the factory.
It will be necessary to adjust the compass to compensate
for compass variance if you live outside zone eight.
Under certain circumstances, as during a long distance
cross
-country trip, it will be necessary to adjust for
compass variance. Compass variance is the difference
between earth's magnetic north and true geographic
north. If not adjusted to account for compass variance,
your compass could give false readings.

yellowblue
2-49
To adjust for compass variance:
1. Press and hold the COMPASS button located at the
bottom of the mirror until a zone number appears in
the display.
2. Find your current location and variance zone number
on the following zone map.3. Press the COMPASS button on the bottom of the
mirror until the new zone number appears in the
display. After you stop pressing the button, the
display will show a compass direction within a few
seconds. (This is the automatic calibration mode.
Drive in a circle to calibrate the mirror. See
ªCompass Calibrationº explained previously.)