1999 BUICK RIVIERA ignition

yellowblue
1-3 Memory Seat and Mirrors (Option)
The memory function controls the driver's seat cushion
and outside mirror positions. It does not store the lumbar
or recline positions.To set your memory seat and mirrors:
1. Adjust the driver's seat cushion to your desired
position. Adjust both outside mirrors to suit you. See
ªMirrorsº in the Index.
2. Press the SET button and then press the 1 or 2 side
of the MEMORY switch within five seconds. You
will hear one beep when you press the SET button
and two beeps when you press the MEMORY button
to confirm that the mirror and seat positions are
entered into memory.
When your vehicle is in PARK (P) with the ignition on
or off, press the same side of the MEMORY switch to
recall the seat and mirror setting.
To do the same thing for a second driver, follow the
preceding steps, but press the other side of the
MEMORY switch.
The EXIT button allows you to get out of the car easily.
When the gear shift selector is in PARK (P) with the
ignition on or off, push EXIT and the seat will go all the
way down and back.

yellowblue
1-5 Heated Front Seat (Option)
If your vehicle has this
option, the switch is on the
armrest. With the ignition in
ACCESSORY or RUN,
press the button once and
the seat will warm up. The
HI light on the button will
come on.
Press the button a second time and the LO light will
come on. The seat will warm to a lower temperature.
Press the button a third time to turn off the heated seat.
The heater will also turn off automatically when the
ignition is turned off.
Reclining Front Seatbacks
The front seatbacks can be
adjusted by pressing the
vertical control located on
the side of the seat. Push it
forward to bring the seat to
a more upright position.
Push it rearward to recline
the seatback.

yellowblue
1-27
If your vehicle ever gets into a lot of water -- such as
water up to the carpeting or higher
-- or if water enters
your vehicle and soaks the carpet, the air bag controller
can be soaked and ruined. If this ever happens, and then
you start your vehicle, the damage could make the air
bags inflate, even if there's no crash. You would have to
replace the air bags as well as the sensors and related
parts. If your vehicle is ever in a flood, or if it's exposed
to water that soaks the carpet, you can avoid needless
repair costs by turning off the vehicle immediately and
disconnecting the battery cables. Don't let anyone start
the vehicle under any circumstances. See your dealer
for service.
Servicing Your Air Bag-Equipped Vehicle
Air bags affect how your vehicle should be serviced.
There are parts of the air bag system in several places
around your vehicle. You don't want the system to
inflate while someone is working on your vehicle. Your
dealer and the Riviera Service Manual have information
about servicing your vehicle and the air bag system. To
purchase a service manual, see ªService and Owner
Publicationsº in the Index.
CAUTION:
For up to 10 minutes after the ignition key is
turned off and the battery is disconnected, an air
bag can still inflate during improper service. You
can be injured if you are close to an air bag when
it inflates. Avoid yellow connectors. They are
probably part of the air bag system. Be sure to
follow proper service procedures, and make sure
the person performing work for you is qualified
to do so.
The air bag system does not need regular maintenance.

2-
yellowblue
2-1
Section 2 Features and Controls
Here you can learn about the many standard and optional features on your vehicle, and information on starting,
shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is
working properly
-- and what to do if you have a problem.
2
-2 Keys
2
-4 Door Locks
2
-8 Remote Keyless Entry System
2
-13 Trunk
2
-14 Theft
2
-15 Universal Theft-Deterrent (Option)
2
-17 PASS-Key
II
2
-18 New Vehicle ªBreak-Inº
2
-19 Ignition Positions
2
-21 Starting Your Engine
2
-23 Engine Coolant Heater (Option)
2
-24 Automatic Transaxle Operation
2
-27 Parking Brake
2
-28 Shifting Into PARK (P)
2
-30 Shifting Out of PARK (P)
2
-31 Parking Over Things That Burn2
-32 Engine Exhaust
2
-32 Running Your Engine While You're Parked
2
-33 Windows
2
-34 Tilt Wheel
2
-35 Turn Signal/Multifunction Lever
2
-40 Exterior Lamps
2
-43 Interior Lamps
2
-46 Mirrors
2
-52 Storage Compartments
2
-58 Accessory Power Outlet
2
-58 OnStar
System (Option)
2
-60 Universal Transmitter (Option)
2
-64 The Instrument Panel - Your
Information System
2
-68 Warning Lights, Gages and Indicators

yellowblue
2-2
Keys
CAUTION:
Leaving children in a vehicle with the ignition
key is dangerous for many reasons. A child or
others could be badly injured or even killed.
They could operate power windows or other
controls or even make the vehicle move. Don't
leave the keys in a vehicle with children.

yellowblue
2-3
The ignition key is for the
ignition only.
The door key is for the
doors and all other locks.When a new vehicle is delivered, the dealer removes the
bar
-coded key tags from the keys, and gives them to the
first owner.
Each tag has a code on it that tells your dealer or a
qualified locksmith how to make extra keys. Keep the
tags in a safe place. If you lose your keys, you'll be able
to have new ones made easily using the tag. If you
misplace your tag, go to your dealer for the correct key
code if you need a new ignition key.
NOTICE:
Your vehicle has a number of features that can
help prevent theft. But you can have a lot of
trouble getting into your vehicle if you ever lock
your keys inside. You may even have to damage
your vehicle to get in. So be sure you have
extra keys.

yellowblue
2-5 Power Door Locks
Press the power DOOR
LOCK/UNLOCK switch
to lock or unlock both
doors at once.
Door Ajar Reminder
If one of the doors on your vehicle is not closed
properly, the DOOR AJAR light on the instrument panel
will come on and stay on until the doors are closed and
completely latched.
Memory Door Locks
This is a Personal Choice feature that programs your
door locks to automatically lock or unlock.
Close the doors and turn on the ignition. Every time you
move the shift lever out of PARK (P), all of the doors
will lock. And, every time you stop and move the shift
lever into PARK (P), the doors will unlock. If someone
needs to get out while you're not in PARK (P), have that
person use the manual or power lock. When the door is
closed again, it will not lock automatically. Just use the
manual or power lock to lock the door again. If you
need to lock the doors before shifting out of PARK (P),
use the manual or power lock button to lock the doors.

yellowblue
2-6
Customizing Your Memory Door Locks Feature
You can program the memory door locks feature to
change to the following modes:
Mode Operation
0 No automatic door lock or unlock.
1 Both doors automatically lock when shifted
out of PARK (P). No automatic door unlock.
2 Both doors automatically lock when shifted
out of PARK (P). Only the driver's door
automatically unlocks when shifted into
PARK (P).
3 Both doors automatically lock when shifted
out of PARK (P). Both doors automatically
unlock when shifted into PARK (P).Vehicles are delivered programmed in Mode 3.
To change the modes:
1. Close both doors and turn the ignition on. Keep both
doors closed throughout this procedure.
2. Press and hold LOCK on the driver's power door
lock switch through Step 4.
3. Press the LOCK button on the remote keyless entry
transmitter. The memory door locks will remain in
the current mode.
4. Press the LOCK button on the transmitter again.
Each time the transmitter's LOCK button is pressed,
the mode will advance by one, going from Mode 3
to 0 to 1, etc.
NOTE: The door locks will cycle according to the
mode entered while customizing memory door locks.
(Mode ª0º has no feedback.)
5. Release the power door lock switch. The memory
door locks will remain in the most recent
mode selected.
This procedure changes the mode for only the
transmitter used to change this setting. The procedure
will need to be repeated for the second transmitter.