1999 AUDI A8 engine

display field 4:

- Continue to hold engine speed at 1800-2200
RPM.

- Press button -3- once to advance to display
group number 35.
Pa
ge 14 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-82

System in Basic Setting 35
1
2
3
4

Indicated on display (1-4 display fields) - Hold engine speed at 1800-2200 RPM until display changes from "Test
OFF" to "Test ON" in display field 4.
- Continue to hold at 1800-2200 RPM until specified value "B2-S1 OK" is
indicated in display field 4.

Display fields

1 2 3 4
Display group 35: Oxygen sensor aging, Bank 2 (time period of
oxygen sensor)
Display xxxx RPM xx.xx
ms xx.xx s Test
OFF/Test
ON
B2-S1 OK/
B2-S1 n.
OK
Indicated Engine speed
(increments of 40
RPM) Engine
load Time period of
HO2S before
TWC, bank 2,
sensor 1 Diagnostic
status
Diagnostic
result
Range 0-6800 RPM 0.00-
12.75
ms 0.00-5.00 s ---
Specified 1800-2200 RPM 0.80- 0.20-2.10 s B2-S1 OK
Pa
ge 15 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

If "B1-S1 n. OK" is indicated in display field 4:
If the specified value "B1-S1 OK" is indicated in display field 4: value 2.00 ms - Check DTC memory page 01
-16
.
- Continue to hold engine speed at 1800-2200 RPM.
- Press -C- button.
Pa
ge 16 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-83

Step 7: Three Way Catalytic Converter (TWC)
diagnosis Basic Setting
HELP
Input display group number XXX

Indicated on display
- Press buttons -0-, -4- and -6- to input display group number 46 (046),
and press -Q- button to confirm input.
System in Basic Setting 46
1
2
3
4

Indicated on display (1-4 display fields)
Note:
The test time for TWC diagnosis is approx. 60 seconds. - Hold engine speed at 1800-2200 RPM until display changes from "Test
OFF" to "Test ON" in display field 4.
- Continue to hold at 1800-2200 RPM until specified value "Cat B1 OK"
is indicated in display field 4.
Pa
ge 17 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-84


Display fields

1 2 3 4
Display group 46: Three Way Catalytic Converter (TWC), Bank 1 diagnosis
Display x.xx x xx.x s Test OFF/Test ON
Cat B1 OK/
Cat B1 n. OK
Indicated Amplitude ratio Exceeded diagnosis range Test time of TWC diagnosis Diagnostic status
Diagnostic result
Range 0.00-1.00 0-9 00.0-60.0 ---
Specified value 0.00-0.26 0-2 60.0 s Cat B1 OK If "Cat B1 n. OK" is indicated in display field 4:

- Check DTC memory page 01
-16
.
If specified value "Cat B1 OK" is indicated in
display field 4:

- Continue to hold engine speed at 1800-2200
RPM.

- Press button -3- once to advance to display
group number 47.
Pa
ge 18 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-85

- Hold engine speed at 1800-2200 RPM until
display changes from "Test OFF" to "Test ON" in
display field 4.

- Continue to hold at 1800-2200 RPM until
specified value "Cat B2 OK" is indicated in
display field 4.

Note:
The test time for TWC diagnosis is approx. 60
seconds.

Display fields

1 2 3 4
Display group 47: Three Way Catalytic Converter (TWC), Bank 2 diagnosis
Display x.xx x xx.x s Test OFF/Test ON
Cat B2 OK/
Cat B2 n. OK
Indicated Amplitude ratio Exceeded diagnosis range Test time of TWC diagnosis Diagnostic status
Diagnostic result
Range 0.00-1.00 0-9 00.0-60.0 ---
Specified value 0.00-0.26 0-2 60.0 s Cat B2 OK
Pa
ge 20 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-86

Step 8: Evaporative Emissions (EVAP)
system and fuel tank leak detection

Note:
During this diagnosis there should be no engine
load, otherwise the diagnosis is interrupted and
can only be restarted after pressing the
accelerator pedal momentarily.

- Start engine and let run at idle.Basic Settin
g
HELP
Input displa
y group number XXX

Indicated on display
- Press buttons -0-, -7- and -0- to input display group number 70 (070),
and press -Q- button to confirm input.
System in Basic Setting 70
1
2
3
4

Indicated on display (1-4 display fields)
If the diagnosis is initiated by the ECM, the display changes from "Test
OFF" to "Test ON" in display field 4.
Note:
If the display changes from "Test ON" to "Test OFF" during the diagnosis,
briefly accelerate the engine to reset and repeat the test. - Let engine continue to run at idle until the specified value "EVAP OK" is
indicated in display field 4.
Pa
ge 22 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-88

Initiate basic setting 71
1
2
3
4

Indicated on display (1-4 display fields)
If the diagnosis is initiated by the ECM, the display changes from "Test
OFF" to "Test ON" in display field 4. - Start engine and let run at idle.
- Let engine continue to run at idle until the specified value "Syst. OK" is
indicated in display field 4.

Display fields

1 2 3 4
Display group 71: Fuel tank leak detection
Display Reed op.
Reed cl. Small leak/large leak
disconnection Syst.Test
Check
Check end Test OFF/Test ON
Syst. OK/
Syst. n.OK
Indicated Status: Reed contact Error message System status Diagnostic status
Diagnostic result
Range --- --- --- ---
Specified value Reed op. --- Check end Syst. OK
Pa
ge 24 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2