39-66
Removing
- Remove center differential page 39
-56
.
- Remove intermediate flange for front final
drive.
Installing
Installation is reverse of removal, noting the following: - Drive seal (arrow) out in direction of transfer gear using mandrel.
- Check seal seat in transmission housing for damage; rework if
necessary.
Note:
If installing the intermediate flange to the output shaft carelessly, the
sealing lip of the seal can be damaged. - Slide seal onto 3404 thrust piece so that the larger and projecting outer
ring (arrow) of seal faces tool.
- Drive in seal up to 3404 thrust piece stop.
- Install center differential page 39
-58
.
Pa
ge 22 of 29 Center differential, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.4
39-68
WARNING!
Do not reinstall spur gears that have fallen to
the ground. The transmission must be
replaced in this case.
- Drive out seal using drift.
Installing
Installation is reverse of removal, noting the
following:
- Slide seal onto 3403 thrust piece.
- Drive seal in up to 3403 thrust piece stop.
Pa
ge 24 of 29 Center differential, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.4
