Page 42 of 51
-  Replace brake light switch / brake pedal switch.
Pa
ge 42 of 51 Electronic En
gine Power Control 
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4 
         
        
        
     
        
        Page 43 of 51
24-147
       If specified values are obtained:  
     
-  Check voltage supply 
     
Checking voltage supply  
    
If LED does not light up:  
 Electrical Wiring Diagrams, Troubleshooting & Component Locations    -  Connect VAG1527B voltage tester as follows:Harness connector  
Terminal  
Measure to  
1   Chassis Ground (GND)  
 
LED must light up. 
Harness connector  
Terminal  
Measure to  
3   Chassis Ground (GND)  
-  Switch ignition on.
 
LED must light up. 
-  Check wire connection from terminal 1 or 3 of connector for open 
circuit and short circuit to Ground (GND): 
Pa
ge 43 of 51 Electronic En
gine Power Control 
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4 
         
        
        
     
        
        Page 44 of 51
24-148
      
-  Repair open circuit or short circuit if 
necessary. 
      If LED lights up:  
     
- Checking activation.
     
Checking activation  
     
-  Connect VAG1598/31 test box at wiring harness 
to Engine Control Module (ECM), do not connect 
ECM  Page 24
-19
 . 
    
-  Check following wire connections for open circuit and short circuit to 
Ground (GND) and B+: Harness connector  
Terminal  
VAG1598/31 test box  
Socket  
2   56  
4   55  
-  Repair open circuit or short circuit if necessary.
Pa
ge 44 of 51 Electronic En
gine Power Control 
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4 
         
        
        
     
        
        Page 50 of 51
24-153
      
Checking voltage supply  
    
If LED does not light up:  
 Electrical Wiring Diagrams, Troubleshooting & Component Locations   
If LED lights up:  -  Connect VAG1527B voltage tester as follows:Harness connector  
Terminal  
Measure to  
1   Chassis Ground (GND)  
-  Switch ignition on.
 
LED must light up. 
-  Check wire connection from terminal 1 of connector to fuse for open 
circuit: 
-  Repair open circuit if necessary.
- Checking activation.
Pa
ge 50 of 51 Electronic En
gine Power Control 
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4