Page 3 of 40
19-2
 
  
Cooling system components (on body)
 
1 - 
Radiator 
Removing and installing   page 19
-17
After replacing, completely replace coolantWith ATF cooler on vehicles with automatic 
transmission 
2 - 
Securing clip 
3 - 
Securing rubber 
4 - 
O-ring Replace if damaged
5 - 
Lower coolant hose Secured to radiator with retaining clipMake sure hose is securely seatedCoolant hose connection diagram   page 19
-9 
6 - 
Securing clip 
To secure temperature switch in coolant 
hose 
Pa
ge 3 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1 
         
        
        
     
        
        Page 6 of 40
19-4
 
  
16 - 
Upper coolant hose 
Secured to radiator with retaining clipMake sure hose is securely seatedCoolant hose connection diagram   page 19
-9 
Pa
ge 6 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1 
         
        
        
     
        
        Page 9 of 40
19-7
 
  
14 - 
O-ring 
Replace if damaged
15 - 
Expansion tank Check using VAG1274 cooling system 
tester with VAG1274/9 adapter 
16 - 
Upper coolant hose Secured to radiator with retaining clipMake sure hose is securely seatedCoolant hose connection diagram   page 19
-9 
17 - 
Coolant line 
Coolant hose connection diagram   page 19
-9 
18 - 
Rear toothed belt guard 
19 - 
Gasket 
Always replace
20 - 
Coolant pump Check for ease of movementCompletely replace if damaged or leakingRemoving and installing   page 19
-20
Pa
ge 9 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1 
         
        
        
     
        
        Page 10 of 40
19-8
 
  
21 - 
Lower coolant line 
Coolant hose connection diagram   page 19
-9 
22 - 
Oil cooler 
23 - 
Belt pulley 
For viscous fan
24 - 
Fan wheel for viscous fan 
25 - 
Viscous fan coupling Note left-hand threadTightening torque only valid when using 
3312 open end spanner. Tighten to 40 Nm (30 ft lb)Removing and installing   page 19
-25
26 - 
Bracket 
For viscous fan
27 - 
From bottom of radiator Coolant hose connection diagram   page 19
-9 
Pa
ge 10 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1 
         
        
        
     
        
        Page 11 of 40
19-9
 
  
Coolant hose connection diagram
 
1 - 
Lower coolant hose 
From radiator to engine
2 - 
Cylinder head/cylinder block 
3 - 
Intake manifold 
4 - 
Coolant line From heat exchanger to engine block
5 - 
Heater core 
6 - 
Coolant hose To heat exchanger
7 - 
Rear coolant line 
8 - 
Expansion tank 
Pa
ge 11 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1 
         
        
        
     
        
        Page 12 of 40
19-10
 
  
9 - 
Oil cooler 
10 - 
Coolant line 
From expansion tank to lower coolant pipe
11 - 
Upper coolant hose 
12 - 
Radiator 
13 - 
Coolant pump 
14 - 
Lower coolant line 
15 - 
Connection For thermostat
Pa
ge 12 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1 
         
        
        
     
        
        Page 13 of 40
19-11
      
Cooling system, draining and refilling
 
     
Draining  
     
WARNING! 
     
The cooling system is pressurized when the 
engine is warm. When opening the expansion 
tank, wear gloves and other appropriate 
protection, cover the cap with a cloth and 
open carefully to relieve system pressure 
slowly. 
     
-  Open coolant expansion tank cap.
    
-  Remove noise insulation panel.
-  Place VAG1306 drip tray underneath engine.
    
-  With bumper removed, open coolant drain plug (arrow) on lower left of 
radiator by turning it counterclockwise. If necessary, attach accessory 
hose to connection. 
- 
With bumper installed, pull off retaining clamp for lower right radiator 
Pa
ge 13 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1 
         
        
        
     
        
        Page 14 of 40
CAUTION! 
Follow disposal regulations for coolant.  hose (from radiator to engine) and disconnect radiator hose from 
radiator. 
Pa
ge 14 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1