1999 AUDI A6 oil

34-130


8 -
Seal
For input shaftPrying out Fig. 3Driving in Fig. 5Always replace when removing input shaftReplacing when transmission is not
disassembled Fig. 4
and Fig. 5

9 -
Oil drain plug, 40 Nm
10 -
Ball sleeve
For selector shaftReplacePulling out Fig. 6Driving in Fig. 7
11 -
Ball sleeves
For selector shaftsReplacePulling out, as - 10 - Fig. 6Driving in, as - 10 - Fig. 7
Pa
ge 5 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10

34-134


26 -
Magnet
CleanWhen replacing transmission housing drive
in with e.g. press tool VW 408 A
27 -
Sender for speedometer -G22- Replacing Page 39
-4
28 -
O-ring
Always replace
29 -
Oil filler plug, 40 Nm
Pa
ge 9 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10

34-135


Note: Fig. 1 Pulling out seal for drive flange
Illustrated, removing oil seal on right-hand side.Procedure for removing oil seal on left and right-hand sides is
identical.

Note: Fig. 2 Driving in seal for drive flange
- Fill space between sealing lip and dust lip with sealing grease G52 128
A1.
Pressing-in depth (factory): 5.5 mmPressing-in depth when re-installing a used drive flange (repairs): 6.5
mm Illustrated, installing oil seal on right-hand side.Procedure for installing oil seal on left and right-hand sides is identical.
Pa
ge 10 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10

34-143


Fig. 17 Installation position of oil baffle plate for transmission DSY
1 - Breather
2 - Oil baffle plate
3 - Selector shaft
Pa
ge 18 of 21 Transmission housin
g, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.10