48-12
Note:
Make sure threads and bolt contact surfaces are free of oil and grease.
Notes: - Position steering gear in plenum chamber.
- Install bolts -1- and -2- but do not tighten.
- Install bolt -3- and tighten to 65 Nm (48 ft lb).
- Tighten bolts -1- and -2- to 65 Nm (48 ft lb).
- Install return hose and tighten 22 mm banjo bolt.
Tightening torque: 50 Nm (37 ft lb)
- Install supply line and tighten 19 mm banjo bolt.
Tightening torque: 40 Nm (30 ft lb)
- Re-install sealing boot.
Damaged seals must be replaced.Make sure seals are properly seated.
- Release steering column lock.
- Center steering wheel, then connect universal joint to steering pinion.
Pa
ge 9 of 10 Steerin
g gear, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.2
