20-22
- Remove EVAP canister cover on bottom of
spare tire well Page 20
-130
.
Note:
Bleed line -2- to the EVAP canister purge regulator valve remains
connected. - Loosen hose connection -1- on bleed line to fuel filler neck.
- Unclip line out from bracket -arrow-.
- Place VAG1383A engine / transmission jack under fuel tank for
support.
- Mark installation position of clamp bands.
Note:
Arrow points in driving direction. - Remove clamp bands -1- to -4-.
- Lower fuel tank.
Pa
ge 17 of 49 Fuel su
pp
ly system, servicin
g (vehicles with front wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.2
20-26
Tightening torques
Component
Nm
Clamp bands for fuel tank on body 25
Aerodynamic trim (on body) in front of rear
axle 10
Cover on spare wheel well 10
Pa
ge 22 of 49 Fuel su
pp
ly system, servicin
g (vehicles with front wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.2
