20-128
Sender for fuel gauge -G, removing and
installing
Vehicles with 2.7 ltr. turbo engine
Observe all safety precautions Page 20
-1 .
Observe rules of cleanliness Page 20
-4 .
Removing
- Fuel pump flange, removing Page 20
-118
.
- Carefully lift out fuel pump flange with fuel
supply line connected and set aside.
- On the inside of the fuel pump flange disconnect
connector for fuel gauge sender.
Note: - Remove sender by pressing tab -arrows-.
The fuel accumulator housing is shown in the illustration without the
fuel tank. The illustration shows the fuel gauge sender for vehicles with front
wheel drive.
Pa
ge 24 of 25 Fuel su
pp
ly system, servicin
g (vehicles with 2.7 ltr. turbo en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.4
20-129
Installing
Installation is in reverse order of removal, but do
the following:
- Install sender for fuel gauge in guides of outer
fuel accumulator housing and press down until
locked in place.
Fuel pump flange, installing Page 20
-121
.
Observe note regarding disconnecting battery.
Pa
ge 25 of 25 Fuel su
pp
ly system, servicin
g (vehicles with 2.7 ltr. turbo en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.4
