1999 AUDI A4 light

94

Clock, setting

Clock is included in tachometer display. To set
time, pull out instrument panel light dimmer
switch.
When switch is pulled out briefly, hands will
advance a minute at a time. Pulled out and held,
hands will advance slowly at first, then rapidly.
Pa
ge 96 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

97

RAPGARD , paint inspection after removal
- Inspect painted surfaces under one of the
following lighting conditions:

Indoors under fluorescent lighting.
Outdoors under bright sunlight.

Important!:
If any defects on the exterior have been identified
(scratches, dings, dents and other types of body
damage):

- Contact your Service Manager and arrange to
repair defects immediately.

Note:

After removal of RAPGARD , some vehicles
may exhibit temporary paint discoloration or paint
swelling (caused by trapped moisture under the
RAPGARD ).

This temporary swelling is caused by the paint
finish absorbing moisture trapped under the
RAPGARD film.

Pa
ge 100 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

98

Adhesive residue removal

CAUTION!

Always read and follow manufacturer
Cautions and Warnings regarding use of
product.

If RAPGARD adhesive residue remains on
paint finish, remove with a non-abrasive polishing
product such as, (3M Part No. 5995) light colors
or (3M Part No. 5996) dark colors. Thick lines of adhesive residue can be removed
with general purpose adhesive cleaner (3M Part
No. 08987-aerosol, or Part No, 08984-qt. can) or
equivalent.

Note:
Paint discoloration (looks like shaded or dark
magic marker lines) can be removed with a heat
gun using the following procedure:

- Hold heat gun approximately 3 in. away from
affected paint surfaces and apply heat using
slow oscillating motions until discoloration is
gone.

- If discoloration remains, wipe the heated area
with Isopropyl alcohol and repeat procedure to
increase surface drying.
Pa
ge 102 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6