1999 AUDI A4 center console

87-125

Removing and installing (A/C control head
with single display)

Removing

CAUTION!

Obtain security code for anti-theft radio.
Note customer's pre-set radio stations.
Disconnect battery Ground (GND) strap.
Remove radio or radion with navigation system
Repair Manual, Radio, Telephone, Navigation,
Repair Group 91


- Grip control head through radio opening and
slide rearward.

Notes:

Parts catalog The control head is held in the center console with 4 clips -A-.Before replacing the control head, ensure correct application (e.g. with
or without knockouts for switches for seat heaters)
Pa
ge 8 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-139

Temperature regulator flap motor -V68-,
removing and installing (1997 )

Remove complete front section of center console
Repair Manual, Body Interior, Repair Group
70


- Loosen floor outlet from the right instrument
panel support page 87
-134
.

Notes for installing: - Identify and mark electrical connectors at flap motor prior to
disconnecting (to prevent mix up) and remove from motor.
- Remove 3 bolts -A-.
- Remove motor and unhook lever -B- (color: red).
After installing, always check DTC memory page 01
-18
.
When installing flap motor, ensure that relay lever -B- is correctly
positioned. Testing -V68- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage).
Pa
ge 23 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-141

Central air flap motor -V70-, removing
and installing (1997 )

Remove complete front section of center console
Repair Manual, Body Interior, Repair Group
70


- Loosen floor outlet from the right instrument
panel support page 87
-134
.

Notes for installing: - Identify and mark electrical connectors at flap motor prior to
disconnecting (to prevent mix up) and remove from motor.
- Remove 3 bolts -A-.
- Remove motor and unhook lever -B- (color: blue).
After installing, always check DTC memory page 01
-18
.
When installing flap motor, ensure that relay lever -B- is correctly
positioned. Testing -V70- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage).
Pa
ge 25 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21