01-250
ESP driving and system test
The ESP driving test is used to test the
plausibility of the signals from the sensor for
transverse acceleration, yaw sensor, and
pressure sensor.
Road test vehicle
Some DTCs are only recognized by the On
Board Diagnostic (OBD)while the vehicle is
moving. You can check the entire system during
a road test. During road test, drive at a speed of
at least 60 km/h for 30 seconds. Check traffic
conditions and perform an ABS regulated braking
when appropriate. You will feel a pulsing in the
brake pedal indicating the system is active.
Note:
Once the ESP driving test has been initiated, it
cannot be aborted and must be performed
completely. After exiting the diagnostic, the
ABS/EDL and ASR/ESP lamps remain switched
on in order to indicate that the test is active and
that system function is not available yet.
Warning, ABS and ESP not functioning!
Pa
ge 9 of 64 Basic settin
g (scan tool function 04
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.15
