13-14
Ribbed belt drive for air conditioner -
assembly overview
CAUTION!
The air conditioner refrigerant circuit must not
be opened.
Note:
Mark the direction of rotation with chalk or felt pen
before removing the ribbed belt. If the belt rotates in
the wrong direction when it is reinstalled, belt
breakage may result. Ensure that the belt is
properly seated on the pulleys when installing.
1 -
Bracket
Pa
ge 14 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1
13-15
2 -
Air conditioner compressor
Do not loosen or disconnect refrigerant
hoses or lines. After removing compressor from
mountings, secure to chassis side member
with wire or similar. Do not leave
compressor suspended on refrigerant
hoses.
3 -
Dowel sleeve Check sleeve is correctly seated in bracket
4 -
33 Nm
5 -
Bracket For A/C compressor
6 -
Tensioner For ribbed beltRemoving and installing ribbed belt
Page 13
-18
Pa
ge 15 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1
