13-33
Installing
Note: - Install drive plate with washer -2- and shim -1- (3.0 mm or 4.0 mm).
Short engines and exchange engines are supplied without bush in
crankshaft. On vehicles with automatic transmission, always knock in
new bush before installing drive plate. Always replace drive plate securing bolts.
Tightening torques
Drive plate to crankshaft
60 Nm + 90
Pa
ge 20 of 26 C
ylinder block, crankshaft and fl
ywheel, disassembl
y and assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.13.2
13-34
Note:
Before installing the transmission, check that the dowel sleeves for
locating engine/transmission are fitted in the engine flange.
Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 37
- Measure distance -a- at three points and calculate average value.
Distance -a- = approx. 12.3 mm.
- Install a different shim if necessary.
- Install transmission.
Pa
ge 21 of 26 C
ylinder block, crankshaft and fl
ywheel, disassembl
y and assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.13.2
