1999 AUDI A4 brake

24-99

Transmission Range (TR) selector lever
position signal, checking


Note:
The Engine Control Module (ECM) uses this
signal to recognize the transmission range
selector lever position. When a driving mode is
selected, idle speed should drop by approx. 50
RPM to reduce creep.

Checking requirement

Control module coding OK page 01
-247
.

- Switch ignition ON.

- Using VAG 1551 scan tool, select "Read
Measuring Value Block" function 08, display
group 004, display field 4 page 01
-249
.
Read measuring value block 4 1 2 3 4

Indicated on display
CAUTION! Specified value: XXX_1X (TR selector lever in P or N)
- Apply brake and select drive mode (1, 2, 3, R or D).
Specified value: XXX_0X
Pa
ge 21 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

24-110

- Find and eliminate open or short circuit; repair
as necessary.
If wiring is OK:

- Replace ABS control module.
If the ABS control module is OK, but the
malfunction is still occurring:

- Replace ECM page 01
-265
.

ABS control module with ABS/EDL/ASR

Notes:

The torque signal is monitored by the
"Automatic Traction Control" Control Module
and by the ECM.

Repair Manual, Brake System On Board
Diagnostic (OBD), Repair Group 01


Vehicles with automatic traction control (ASR)
can be recognized by the ASR indicator light in
the instrument cluster or by control module
identification displayed during the ABS On
Board Diagnostic program sequence.
Pa
ge 36 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

Repair Manual, Brake System On Board
Diagnostic (OBD), Repair Group 01


Checking requirement

Control module coding OK page 01
-247
.
Pa
ge 37 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25