1999 AUDI A4 lock

Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 00, engine codes, engine/transmission allocation,
ratios, equipment

Pa
ge 9 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-193

Notes:

When the printer is switched on, the contents of
the display will be printed out on the scan tool
log.
If specified values are not obtained in all display
fields:

-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display
Pa
ge 10 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-194
Test table for transmissions with hydraulic control -E17-

Display
group No. Display
field Description
Test requirements
Spec. Value
on V.A.G
1551
display Corrective actions
001
1 Engine speed
(RPM) with engine running approx.
0...8200
RPM - Perform electrical test page 01
-
273

- Check identification of Transmission
Control Module (TCM) page 01
-
273
, replace if necessary
- Check DTCs of Engine Controlk
Module (ECM) and if necessary check
identification

2 Sensor for
transmission RPM -
G182- while driving, with
gear selected
1) RPM
- see DTC table, DTC number 17100 /
P0716 page 01
-45

R
approx. 0...10
Continue


1M approx. 0...10
1) While driving, a second mechanic is required to read specifications.
Pa
ge 11 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-195
Only for transmission with hydraulic control -E17-
Display
group No. Display
field Description
Test
requirements Spec. value
on V.A.G
1551
display Corrective actions
001 2 Sensor for
Transmission RPM
-G182- 1
With engine
under load approx.
0...10 - Perform electrical test page 01
-273

1
In deceleration
mode approx.
0...300 - Read measuring value block, Display
group number 007 and determine which
elements are faulty or not activated while
driving

2 approx.
0...4000
1)

3 approx.
0...8200 1)

4 approx.
0...8200 1)
Continue


5 approx.
0...8200
1)
1) Indication should mimic the current engine speed in display field 1, i.e. when engine speed increases or decreases,
transmission input RPM should increase or decrease.
Pa
ge 12 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-196
Only for transmission with hydraulic control E17
Display
group No. Display
field Description
Test
requirements Spec. value
on V.A.G
1551
display Corrective actions
001
3 Transmission Vehicle
Speed (VSS) sensor
-G38-
2) While driving, with
gear selected
1) ... RPM
3)
- See appropriate DTC for Transmission
Vehicle Speed Sensor (VSS) -G38-
(also called sensor for transmission
output RPM -G195-)
2)
R
approx.
0...2000 - Perform electrical test page 01
-273

1M, 1 approx.
0...1200

2 approx.
0...4000

3 approx.
0...5800

4 approx.
0...8200 - Read measuring value block, display
group number 007
Continue


5 approx.
0...8200 - Determine while driving which
elements are faulty and which aren't
active
Notes and footnotes for display field 1 to 3 of display group number 001 are on the next page.
Pa
ge 13 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-197
1) While driving, a second mechanic is required to read specifications. 2) Also referred to as the sensor for transmission output RPM -G195-. 3) Indication should mimic the engine speed in display field 1, i.e. when engine speed increases or decreases, transmission
RPM (output RPM) should increase or decrease.
Notes for display group number 001, display field 1 to 3;
Test conditions: Shifting process must be finished. Vehicle must not be in deceleration mode (no down-hill driving or
engine braking).
Pa
ge 14 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-198
Only for transmission with hydraulic control -E17-
Display
group No. Display
field Description
Test requirements
Spec. value on
V.A.G 1551
display Corrective actions
001
4 Gear
selected while
driving
1) Selector lever
position
- Check solenoid valves. See
display group number 005 and
006

"N"
"1"..."5"
2)
- See DTC table, DTC numbers of
appropriate solenoid valves

"R" "R"
- Check selector lever position.
Display group number 004

"D" "1" "2" "3" "4"
"5"

"4" "1" "2" "3" "4"

"3" "1" "2" "3"

"2" "1M" "2"
Notes and footnotes for display field 4 of display group number 001 are on the next page.
Pa
ge 15 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-199
1) While driving, a second mechanic is required to read specifications. 2) Transmission Control Module (TCM) is equipped with an automatic gear follower. The forward gear is indicated that the
TCM would activate in selector lever position "D".
Note on selected gear :
Faulty solenoid valves or other diagnostic malfunctions can prevent the selection of certain gears.
Pa
ge 16 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13