6-15
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
EW000087
w
Proper loading of your motorcycle
is important for several character-
istics of your motorcycle; such as
handling, braking, performance
and safety. Do not carry loosely
packed items that can shift.
Securely pack your heaviest items
close to the center of the motorcy-
cle, and distribute the weight
evenly from side to side. Check the
condition and pressure of your
tires. NEVER OVERLOAD YOUR
MOTORCYCLE. Make sure the
total weight of the cargo, rider,
passenger, and accessories (fair-
ing, saddlebags, etc. if approved
for this model) does not exceed
the maximum load of the motorcy-
cle. Operation of an overloaded
motorcycle could cause tire dam-
age, an accident, or even injury.
* Load is the total weight of cargo, rider, passen-
ger, and accessories.
Maximum load* 157 kg
Cold tire pressure: Front Rear
125 kPa 150 kPa
Up to 90 kg (1.25 kgf/cm
2, (1.50 kgf/cm2,1.25 bar) 1.50 bar)
90 kg load ~150 kPa 175 kPa
Maximum load*(1.50 kgf/cm
2, (1.75 kgf/cm2,1.50 bar) 1.75 bar)
Off-road riding125 kPa 125 kPa
(1.25 kgf/cm
2, (1.25 kgf/cm2,1.25 bar) 1.25 bar)
High-speed riding150 kPa 175 kPa
(1.50 kgf/cm
2, (1.75 kgf/cm2,
1.50 bar) 1.75 bar)
EAU00668Tires
To ensure maximum performance,
long service, and safe operation,
note the following:
1. Tire air pressure
Always check and adjust the
tire pressure before operating
the motorcycle.
EW000082
w
Tire inflation pressure should be
checked and adjusted when the
temperature of the tire equals the
ambient air temperature. Tire infla-
tion pressure must be adjusted
according to total weight of cargo,
rider, passenger, and accessories
(fairing, saddlebags, etc. if
approved for this model), and vehi-
cle speed.
5FY-28199-EX (TW200) 4/16/02 5:38 PM Page 44
8-1
EAU01038
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
Specifications
Model TW200
Dimensions:
Overall length 2,090 mm
Overall width 815 mm
Overall height 1,115 mm
Seat height 790 mm
Wheel base 1,325 mm
Ground clearance 250 mm
Minimum turning radius 1,900 mm
Basic weight (With oil and full
fuel tank):126 kg
Engine:
Engine type Air-cooled 4-stroke, SOHC,
gasoline
Cylinder arrangement Forward inclined
single cylinder
Displacement 196 cm
3
Bore ×Stroke 67.0 ×55.7 mm
Compression ratio 9.5:1
Starting system Electric and kick starter
Lubrication system Wet sumpEngine oil:
Type:
Classification API Service “SE”, “SF” type
or equivalent
(e.g. “SF-SE”, “SF-SE-CC”,
“SF-SE-SD” etc.)
Capacity:
Periodic oil change 1.0 L
With oil filter replacement 1.1 L
Total amount 1.3 L
Air filter:Wet type element
Fuel:
Type Regular gasoline
Fuel tank capacity 7.0 L
Reserve amount 1.0 L
Carburetor:
Type / quantity Y29P-5C / 1
Manufacturer TEIKEI
–10° 0° 10° 20° 30° 40°
SAE 10W/30
SAE 10W/40
SAE 20W/40
SAE 20W/50C
5FY-28199-EX (TW200) 4/16/02 5:38 PM Page 67
8-2
EAU01038
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
Spark plug:
Type / Manufacturer D8EA / NGK or
X24ES-U / DENSO
Spark plug gap 0.6 ~ 0.7 mm
Clutch type:Wet, multiple-disc
Transmission:
Primary reduction system Spur gear
Primary reduction ratio 3.318
Secondary reduction system Chain drive
Secondary reduction ratio 3.571
Number of sprocket teeth
(Rear/Front) 50/14
Transmission type Constant mesh 5-speed
Operation Left foot operation
Gear ratio 1st 2.833
2nd 1.789
3rd 1.318
4th 1.040
5th 0.821
Chassis:
Frame type Diamond
Caster angle 26.5°
Trail 94 mmTire:
Type With tube
Size:
Front 130/80-18 66P
Rear 180/80-14M/C 78P
Manufacturer / model:
Front BRIDGESTONE / TW31
Rear BRIDGESTONE / TW32
Maximum load* 157 kg
Air pressure (cold tire):
up to 80 kg load*
Front 125 kPa; 1.25 kgf/cm
2; 1.25 bar
Rear 125 kPa; 1.25 kgf/cm
2; 1.25 bar
80 kg load ~ Maximum
load*
Front 150 kPa; 1.50 kgf/cm
2; 1.50 bar
Rear 175 kPa; 1.75 kgf/cm
2; 1.75 bar
Off-road riding
Front 125 kPa; 1.25 kgf/cm
2; 1.25 bar
Rear 125 kPa; 1.25 kgf/cm
2; 1.25 bar
High-speed riding
Front 150 kPa; 1.50 kgf/cm
2; 1.50 bar
Rear 175 kPa; 1.75 kgf/cm
2; 1.75 bar
*Load is total weight of cargo, rider, passenger and accessories.
5FY-28199-EX (TW200) 4/16/02 5:38 PM Page 68
8-4
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
EAU01064
HOW TO USE THE CONVERSION TABLE
All specification data in this manual are listed in SI
and METRIC UNITS.
Use this table to convert METRIC unit data to
IMPERIAL unit data.
Ex.
METRIC MULTIPLIER IMPERIAL
** mm×0.03937 = ** in
2 mm×0.03937 = 0.08 inMETRIC TO IMPERIAL
Metric unit Multiplier Imperial unit
m•kg 7.233 ft.lb
Torquem•kg 86.794 in•lb
cm•kg 0.0723 ft•lb
cm•kg 0.8679 in•lb
Weightkg 2.205 lb
g 0.03527 oz
Speed km/hr 0.6214 mph
km 0.6214 mi
m 3.281 ft
Distance m 1.094 yd
cm 0.3937 in
mm 0.03937 in
cc (cm3) 0.03527 oz (IMP liq.)
Volume/ cc (cm3) 0.06102 cu•in
Capacity lt (liter) 0.8799 qt (IMP liq.)
lt (liter) 0.2199 gal (IMP liq.)
kg/mm 55.997 lb/in
Misc. kg/cm
214.2234 psi (lb/in2)Centigrade(°C)9/5 + 32Fahrenheit(°F)
CONVERSION TABLE
5FY-28199-EX (TW200) 4/16/02 5:38 PM Page 70
