1998 YAMAHA T105 lights

GIVE SAFETY THE RIGHT OF WAY ...............5
GENERAL NOTE..............................................6
DESCRIPTION ..................................................8
MOTORCYCLE IDENTIFICATION ...................9
Identification numbers record ...................9
Key identification number .......................10
Frame serial number ................................10
Engine serial number ...............................10
CONTROL FUNCTIONS................................11
Main switch ...............................................11
Indicator lights ..........................................12
Instrument panel.......................................13
Handlebar switches ..................................14
Shift pedal .................................................16
Front brake lever .......................................16
Rear brake pedal .......................................17
Fuel tank cap .............................................17
Starter lever 1..........................................18
Kick starter .................................................18Steering lock..............................................19
Seat ............................................................20
Helmet holder ...........................................21
Side cover removal...................................21
PRE-OPERATION CHECKS ...........................22
Fuel .............................................................24
Engine oil ...................................................25
Tires ............................................................26
OPERATION AND IMPORTANT
RIDING POINTS.............................................27
Starting and warming up a
cold engine ................................................28
Starting a warm engine ...........................30
Shifting.......................................................31
To start out and accelerate.......................31
To decelerate .............................................33
Engine break-in .........................................34
Parking .......................................................36
3
EAA30001
CONTENTS
T105(E) O/M-1 9/11/01 11:16 AM Page 3 (1,1)

EAB10000Indicator lights
12
1Turn indicator light
2Neutral indicator light
3Top gear indicator light
4High beam indicator light
Description Function
Turn indicator light
“5”:
Neutral indicator
light “N”:
Top gear indicator
light “TOP”:
High beam indica-
tor light “&”:Flashes when the
turn switch is
“ON”.
Lights when the
transmission is in
neutral.
Light when the
transmission is in
top (4th) gear.
Lights when the
headlight high
beam is used.
T105(E) O/M-1 9/11/01 11:16 AM Page 12 (1,1)

Position Function Handlebar switches
Lights switch
Dimmer switch
Turn signal switch
14
1Lights switch2Dimmer switch3Turn signal switch
Position Function
ON
OFF
Headlight, taillight and meter lights
comes on when engine is running.
Headlight, taillight and meter lights
does not come on.
Position Function
&(HI)
% (LO)Turns on the headlight high
beam.
Turns on the headlight low
beam.4
6
OFFTurns on the left flasher.
Turns on the right flasher.
Turns off the flasher.
Push the switch in after it has
returned to center position.
∇
T105(E) O/M-1 9/11/01 11:16 AM Page 14 (1,1)

22
PRE-OPERATION CHECKS
Before using this motorcycle, check the following points:
Item Routine Page
Fuel9Check fuel level/top up as required. 24
Engine oil9Check oil level/add oil as required. 25, 41~43
9Check operation, condition and free play. Adjust if necessary.
BrakeMake sure the brankes are working properly by checking at 50~52
low speed shortly.
Throttle grip/Housing9Check for smooth operation. Lubricate/Adjust if necessary.—
Drive chain9Check chain slack and condition. Adjust if necessary. 53~56
Wheels/Tires9Check tire pressure, wear, damage and spoke tightness. 26~27
Control/Meter cable9Check for smooth operation. Lubricate if necessary.—
Brake and shift pedal shafts9Check for smooth operation. Lubricate if necessary. 57
Brake lever pivots9Check for smooth operation. Lubricate if necessary. 57
Center and sidestand pivots9Check for smooth operation. Lubricate if necessary. 57
Fittings/fasteners9Check all chassis fittings and fasteners.
—
9Tighten/Adjust, if necessary.
Lights and signals9Check for proper operation.—
Switches9Check for proper operation.—
Battery9Check fluid level, top-up with distilled water if necessary. 59~61
T105(E) O/M-1 9/11/01 11:16 AM Page 22 (1,1)