1998 YAMAHA T105 ignition

Position Function Key removal
EAB00000
CONTROL FUNCTIONS
EAB00100Main switch
The main switch controls the ignition and lighting systems. Its operation is described
below.
11
ON
Electrical circuits are switched on.
The engine can be started.Cannot be removed.
Can be removed.
Can be removed. All electrical circuits are switched off.
The steering is locked and all
electrical circuits are switched off. OFF
LOCK
T105(E) O/M-1 9/11/01 11:16 AM Page 11 (1,1)

EAF40000Parking
When parking the motorcycle, stop the en-
gine and remove the ignition key.EUU63000wThe muffler and exhaust pipe are hot.
Park the motorcycle in a place where
pedestrians or children are not likely to
touch the motorcycle. Do not park the mo-
torcycle on a slope or soft ground; the mo-
torcycle may overturn.
36
T105(E) O/M-2 9/11/01 11:17 AM Page 36 (1,1)

EAI91001*Fuse replacement
1. The fuse case is located inside the
right sidecover.
2. If a fuse is blown, turn off the ignition
switch and the switch of the circuit in
question. Install a new fuse of proper
amperage. Turn on the switches and
see if the electrical device operates. If
the fuse immediately blows again,
consult a Yamaha dealer.EUU34400cCDo not use fuses of higher amperage rating
than those recommended. Substitution of a
fuse of improper rating can cause extensive
electrical system damage and possibly a
fire.
62
1Fuse case
Specified fuse: 7A
T105(E) O/M-3 9/11/01 11:17 AM Page 62 (1,1)

70
Model
Wheel travel:
Front 80 mm
Rear 65 mm
Electrical:
Ignition system C.D.I
Generator system Flywheel magneto
Battery type/capacity 12V5AH
Headlight type: Krypton bulb
Bulb wattage/quantity:
Headlight 12V30W/30W
Tail/brake light 12V/5W/21W
Flasher light 12V10W ×4
Meter light 12V1.7W ×1
Indicator light wattage/quantity:
“NEUTRAL” 12V3.4W ×1
“HIGH BEAM” 12V3.4W ×1
“TURN” 12V3.4W ×1
“TOP” 12V3.4W ×1
T105(E) O/M-3 9/11/01 11:17 AM Page 70 (1,1)