AND EQUIPMENT
Wiper and washer system
The wiper and washe r system works only
when the ignition is on.
The
heated* washer jets do not have a
separate
swit ch . Depending on the outside
temperature. the heated washer jets
operate whe n the ignit ion is on.
To prevent damage to the wiping system,
was her container. see
KING AND Booklet 3.2. for
furth er details .
Replacing wiper blades . see next page .
heed
ferent settings using the sma ll lever A .
Turn the small lever A to the right -shorter intervals
Turn the
each setting, the intervals are also
trolled by the speed of th e veh icle.
ers keep going for about four seco nds.
46 --------------------CLEAR
Wiper blades must be in good condition so
that you can see clearly through the winds
hield.
your wiper blades regularly with a
windshield washer solution to prevent
streaking .
Fold the wiper arm away from the wind
shield and pivot the
wiper blade mount
away from the wiper arm.
Remove the wiper blade from the mount
by
it in the direction of the arrow.
Installing new windshield wiper
blades
Install the new wiper blade by pushing in
cleanability of the windshield. the opposite direction of the arrow.
Pivot the wiper blade mount back and
lower the wiper arm back on to the wind-
shield.
