Downloaded from www.Manualslib.com manuals search engine 01-8
A B
C
D
E
Perform directed
entry of electrical
tests Service
hydraulic/mechanical
parts of brake system (
Repair Manual)
1. Perform all test steps
of electrical checks
Page 01
-102
Identification not OK.
2. Service
hydraulic/mechanical
parts of brake system
( Workshop
Manual)
Replace control module
- Connect V.A.G 1551 and check DTC memory again (02).
- Erase DTC memory (05)
- Perform test drive at more than 20 km/h (13 mph) and allow the ABS to
regulate braking.
- Check DTC memory again after test drive. If "No DTC recognized" appears
on display of V.A.G 1551 after repairing DTCs and performing test drive the On
Board Diagnostic (OBD) is completed.
Стр. 8из 8 ABS ITT Mark 20 IE On Board Diagnostic (OBD)
Downloaded from www.Manualslib.com manuals search engine 01-142
A B
C
D
E
Perform directed
entry of electrical
tests Service
hydraulic/mechanical
parts of brake system (
Repair Manual Brake
System)
1.
Perform all test steps
of electrical checks
from Page 01
-288
Identification not OK.
2. Service
hydraulic/mechanical
parts of brake system
( Repair Manual
Brake System)
Replace control module
- Connect V.A.G 1551 scan tool or tester VAS 5051 and check DTC memory
02.
- Erase DTC memory (05)
- Perform test drive at more than 20 km/h (13 mph) and allow the ABS regulate
braking.
- Check DTC memory after test drive. If "No DTC recognized" appears on
display of V.A.G 1551 scan tool or tester VAS 5051 after repair DTCs and
perform test drive, the On Board Diagnostic (OBD) is completed.
Стр. 10из 10 ABS Mark 60 On Board Diagnostic (OBD), vehicles from my 10.00
