1998 VOLKSWAGEN JETTA ABS

Downloaded from www.Manualslib.com manuals search engine 01-315


Continuation of test step 17a
Switch to measuring range:
Resistance measurement (200 /20 M )
Test
step V.A.G
1598
sockets Item
tested Test conditions
- Additional operationsSpecification
Measures for
deviations from
specification
17a - Wiring for
steering
angle
sensor -
G85-
Measuring range
set to 200
Ignition switched
off
- Connect test box
V.A.G 1598/36

- Check wiring for
open circuit between
steering angle sensor -
G85- and ABS control
module (w/EDL) -
J104- multi-pin
connector Max. 1.5
Electrical Wiring
Diagrams,
Troubleshooting &
Component
Locations binder - Check wiring using
wiring diagram
Test step 17a: On next page.
Стр. 28из 38 Electrical check of Mark 60

Downloaded from www.Manualslib.com manuals search engine 01-317


Switch to measuring range:
Resistance measurement (200 /20 M )
Test
step V.A.G
1598
sockets Item tested Test conditions
- Additional
operations Specification
Measures for
deviations from
specification
18 -
Wiring for
sensor for
transverse
acceleration -
G200- and
sender for
rotation rate -
G202-
Ignition switched
off
Measuring range
set to 200


- Connect test box
V.A.G1598/36

- Check wiring for
open circuit between
multi-pin connector of
sensor for transverse
acceleration -G200-,
sender for rotation
rate -G202- and
multi-pin connector of
ABS control module
(w/EDL) -J104-: Max. 1.5
Electrical
Wiring Diagrams,
Troubleshooting &
Component
Locations binder - Check wiring
using wiring
diagram
Test step 18: Continued on next
page.
Стр. 30из 38 Electrical check of Mark 60

Downloaded from www.Manualslib.com manuals search engine 01-319


Switch to measuring range:
Resistance measurement (200 /20 M )
Test
step V.A.G
1598
sockets Item
tested Test conditions
- Additional operationsSpecification
Measures for
deviations from
specification
19 - Wiring for
sender 1
for brake
booster -
G201-
Ignition switched off

Measuring range set
to 200
- Disconnect connection
from sender 1 for brake
booster -G201-
- Disconnect multi-pin
connection T47 from
ABS control module
(w/EDL) -J104-
- Connect test box
V.A.G 1598/36

- Check wiring for open
circuit between sender
1 for brake booster -
G201- multi-pin
connector and ABS
control module (w/EDL)
-J104- multi-pin
connector Max. 1.5
Electrical Wiring
Diagrams,
Troubleshooting &
Component
Locations binder - Check wiring
using wiring
diagram
Test step 19: Continued on next
page.
Стр. 32из 38 Electrical check of Mark 60

Downloaded from www.Manualslib.com manuals search engine 01-324


Switch to measuring range:
Resistance measurement 200
Test
step V.A.G
1598
sockets Item tested Test conditions
- Additional
operations Specification
Measures for
deviations from
specification
22 - Resistance
of K wire for
V.A.G 1551,
connector
T16
1)
Ignition switched
off
- Disconnect multi-pin
connector from ABS
control module
(w/EDL) -J104
- Connect test box
V.A.G 1598/36
- Connect hand
multimeter V.A.G
1526 to contacts
T16/7
1) and T47/2 of
multi-pin connector of
ABS control module
(w/EDL) -J104- using
cables from adapter
set V.A.G 1594 Max. 1.5
Electrical Wiring
Diagrams,
Troubleshooting &
Component
Locations binder - Check wiring
using wiring
diagram
1) Diagnosis connector contact assignment Page 01-292
Стр. 37из 38 Electrical check of Mark 60

Downloaded from www.Manualslib.com manuals search engine 01-325


Switch to measuring range:
Resistance measurement (200 )
Test
step V.A.G
1598
sockets Item tested Test
conditions
- Additional
operations Specification
Measures for
deviations from
specification
23 14 + 38 Coding bridge for
ABS and
ABS/EDL/ASR
front wheel drive
Ignition
switched
off 0.0 -1.0
12 + 38 Coding bridge for
ABS/EDL/ASR/ESP
front wheel drive
12 + 9 Coding bridge for
ABS/EDL/ASR/ESP
4MOTION

Electrical Wiring
Diagrams,
Troubleshooting &
Component
Locations binder - Check wiring
using wiring
diagram
Стр. 38из 38 Electrical check of Mark 60

Downloaded from www.Manualslib.com manuals search engine 01-326


Definitions
These explanations refer only to this assembly
group: ABS On Board Diagnostic (OBD). These
definitions are not necessarily generally valid.

ABS
Anti-locking brake system. Further information
on the ABS can be found in the relevant self-
study programs.

Display group number Read measured
value block

ASR
Traction Control System

Data bus
Transportation of data. To do this the electrical
signals are brought into a certain format (BUS).
Further information can be found in Self-study
programs. Also called CAN Bus.

Data bus low (high)
The voltage used to transport the data is low
(high). Further information can be found in Self-
study programs.

Speed sensor
Sends speed signals to control module.
Стр. 1из 6 Definitions

Downloaded from www.Manualslib.com manuals search engine 01-329



Short to positive
Current flows incorrectly to a live component
without supplying a consumer.

Brake pressure release solenoid -F84-
The trip switch is installed in the brake booster
and is required by the control module to
recognize the braking desired by the driver.

Magnetic coil for brake pressure, in brake
booster, -N247-
The brake pressure solenoid is installed in the
brake booster and ensures that a pre-pressure
of 10 bar is available for the ABS/ESP pump.

Read measured value block
The control module can transfer a considerable
amount of test data. This test data delivers
information on the operational condition of the
system and/or sensors connected to it. In many
cases the transferred test data supports
troubleshooting and malfunction repair. The
test data has been summarized into single
display groups because all the information
cannot be evaluated at the same time. The
information can be selected via display group
numbers.

EBC
Engine braking control
Стр. 4из 6 Definitions