SUPRA (U)
60
The gauge indicates the engine coolant
temperature when the ignition switch is
on. The engine operating temperature
will vary with changes in weather and
engine load.
If the needle points to the red zone or
higher, stop your vehicle and allow the
engine to cool.
Your vehicle may overheat during severe
operating conditions, such as: Driving up a long hill on a hot day.
Reducing speed or stopping after high
speed driving.
Idling for a long period with the air
conditioning on in stop- and- go traffic.
NOTICE
Do not remove the thermostat in
the engine cooling system as thismay cause the engine to overheat.The thermostat is designed to con-
trol the flow of coolant to keep thetemperature of the engine withinthe specified operating range.
Do not continue driving with anoverheated engine. See ºIf yourvehicle overheatsº in Part 4.
Tachometer
The tachometer indicates engine speed
in thousands of rpm (revolutions per
minute). Use it while driving to select
correct shift points and to prevent en-
gine lugging and overrevving.
Driving with the engine running too fast
causes excessive engine wear and poor
fuel economy. Remember, in most cases
the slower the engine speed, the greater
the fuel economy.
NOTICE
Do not let the indicator needle get
into the red zone. This may causesevere engine damage.
Engine coolant temperature
gauge
SUPRA (U)97
Heating
For best results, set controls to:
For automatic operation
'
Press in the ºAUTO º button.
Temperature ' To the desired
temperature
Air conditioning ' OFF
For manual operation '
Fan speed ' To the desired fan speed
Temperature ' To the desired
temperature
Air intake ' FRESH (outside air)
Air flow ' FLOOR
Air conditioning ' OFF
For quick heating, select recirculated
air for a few minutes. To keep the
windows from fogging, select fresh af-
ter the vehicle interior has been war-
med.
Press the ºA/Cº button on for dehumidi-
fied heating.
Choose floor/windshield air flow to heat
the vehicle interior while defrosting the
windshield. Air conditioning
For best results, set controls to:
For automatic operation
'
Press in the ºAUTO º button .
Temperature ' To the desired
temperature
Air conditioning ' ON
For manual operation '
Fan speed ' To the desired fan speed
Temperature ' To the desired
temperature
Air intake ' FRESH (outside air)
Air flow ' PANEL
Air conditioning ' ON
For quick cooling, move the air intake
selector to recirculate for a few min-
utes. Ventilation
For best results, set controls to:
For automatic operation
'
Press in the ºAUTO º button .
Temperature ' Towards low
temperature
Air conditioning ' OFF
For manual operation '
Fan speed ' To the desired fan speed
Temperature ' To w a r d s low
temperature
Air intake ' FRESH (outside air)
Air flow ' PANEL
Air conditioning ' OFF