TRANSFER CASE (TOD) 5D2-33
9 - 16 Vdc
6 - 16 Vdc
2 mA
1 A
7 A
20 A
Removal & Installation Procedure
1. Turn the ignition switch to "OFF" position.
2. Remove 30 pin connector from TOD control unit.
3. Unscrew 2 bolts (1).
Installation Notice
1 Bolt (M6 x 16, 2pieces)................ 9-11 Nm
2 TOD control unit
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
TOD CONTROL UNIT
TOD Electric Characteristics
Voltage
Parasitic Current
(Under max. operation Voltage)
Max. Operation Current
(Under max. operation Voltage)Normal Operation Range
CAN communication Operation Range
Ignition “OFF”
Ignition “ON”
Motor “OFF”
Motor “ON”
4. Installation should follow the removal procedure in the
reverse order.
Notice
When replace TOD control unit, it is required to make a
coding correspondent with vehicle specification.
Tightening Torque 9 - 11 Nm
