1998 SSANGYONG MUSSO engine oil

BODY WIRING SYSTEM 9A-21
GASOLINE ENGINE (HFM)
1 ECU
2 Main Wiring Connector
3 Crankshaft Position Sensor
4 Knock Sensor
5 Hot-Film Air Mass Sensor
6 Aspiration Sensor
7 Throttle Regulating Unit
8 Knock Sensor
9 Camshaft Position Sensor
10 Ignition Coil 3
11 Ignition Coil 2
12 Ignition Coil 113 Injector 6
14 Injector 5
15 Injector 4
16 Injector 3
17 Injector 2
18 Injector 1
19 Camshaft Adjustment Magnet
20 Resonance Flap
21 Temperature Sensor (Gauge)
22 Double Sensor
23 Ground

BODY WIRING SYSTEM 9A-23
MANUAL TRANSMISSION
1 Main Wiring Connector......................Diesel E/G
2 Main Wiring Connector..................Gasoline E/G
3 Main Wiring Connector.........................Gasoline
(E32, E23) E/G
4 Back Up Switch5 Oil Pressure Switch
6 Start Motor Solenoid
7 Micro Switch
8 Speed Sensor (Turbo Diesel Engine Only)

INSTRUMENTATION/DRIVER INFORMATION 9E-3
COMBINATION METER
COMPONENT LOCATOR
1. Speedometer
2. Odometer
3. Trip odometer
4. Tachometer
5. Coolant temperature gauge
6. Fuel gauge
7. Low fuel level warning light
8. Turn signal indicator (left)
9. Turn signal indicator (right)
10. Outside rearview mirror & tailgate heating switch
11. Reset button
12. Auto shift indicator*
13. Door open warning light
14. TCS indicator (equipped with ABD)*
21. ABS warning light*22. EBD warning light*
23. ECS / SPORT warning light*
24. 4 - wheel warning light*
25. 4 - wheel high indicator
26. 4 - wheel low indicator
27. WINTER indicator
28. POWER indicator
29. High beam indicator
15. Alternator warning light
16. Engine oil pressure warning light
17. Brake system warning light
18. Glow indicator light (For Diesel engine)
19. Airbag warning light*
20. Seat belt reminder

IMMOBILIZER SYSTEM 9W-3
SYSTEM DESCRIPTION
Gasoline Version
The Immobilizer System consists of an electronic device with integrated coil, called ‘Active Antenna’, the crypto
transponder, which is integrated in the ignition key, and the engine management system (EMS).
The Active Antenna is mounted at the ignition lock and handles the following tasks :
lTo supply the transponder with power
lTo receive the data from the EMS and transmit it to the transponder
lTo receive and demodulate the data from the transponder and transmit it to the EMS
The whole Immobilizer software, the authentication and the management of valid keys is completely managed by the
EMS.
Immobilizer system for gasoline vehicle