AIR CONDITIONING
Dehydration canister
62
13828R1
Remove the dehydration canister from under-
neath the vehicle.
Fit plugs on each hole to prevent any entry of hu-
midity into the components.
REFITTING
Proceed in the reverse order to removal.
Check that the seals are in good condition and lu-
bricate them with
P.A.G. SP 10 oil.
Create a vacuum, then fill the R134a coolant cir-
cuit using the filling equipment.
When changing the dehydration canister, add 15
ml of
P.A.G. SP 10 oil to the circuit.
NOTE: tightening torque of bolt (2) : 1.2 daN.m
REMOVAL
Drain the R134a coolant circuit using the filling
equipment.
Remove:
- the two radiator upper mounting bolts,
- the two mounting bolts which secure the pipes
to the dehydration canister.
Move back the radiator-condenser assembly
slightly.
Through the bumper, remove the two dehydra-
tion canister to condenser retaining bolts (1).
62-56
