Overhead Console READING LAMPS: To turn either reading lamp on or
off, press the switch next to it.
k
GARAGE DOOR OPENER: You can store your
garage door opener in the rear compartment of
your
overhead console, and operate it from this position.
To install your garage door opener, follow
these instructions:
1. Open the compartment by pressing the latch forward.
Remove the piece of self-sticking Velcro?
2. Peel the protective backing from the Velcro
and press it
firmly to the back of your garage
door opener.
3. Be sure that the button on your garage door opener is
centered above
the area with raised lines on the
compartment door. Make sure the button is facing
down and press the opener firmly into place.
2-55
4.
5.
Once the opener is installed, remove the peg (B)
from the compartment. Install the peg onto the
feature
(A) on the door that is aligned with your
garage door opener button.
Add one peg
at a time until your garage door opener
operates with the compartment door closed when
you press the button.
SUNGLASSES STORAGE COMPARTMENT: Your
sunglasses storage compartment
is the second
compartment
fkom the back on the overhead console. To
open the sunglasses storage compartment, press the
release latch
forward and pull the compartment down to
the full
open position.
ACCESSORY POWER OUTLET: This is located
in front
of your reading lamps in a small, black door.
Push up on the bottom edge of this door to expose
your
accessory power outlet and a small
storage compartment.
2-56
