1998 PONTIAC FIREBIRD wheel

[x] Cancel search: wheel

Page 246 of 406

PONTIAC FIREBIRD 1998  Owners Manual 7. Tighten the wheel  nuts 
firmly in a crisscross 
sequence as shown. 
/! CAUTION: 
Incorrect  wheel nuts or  improperly  tightened 
wheel  nuts  can  cause  the  wheel to become  loose 
and  even  c

Page 247 of 406

PONTIAC FIREBIRD 1998  Owners Manual NOTICE: 
Improperly  tightened wheel nuts can  lead  to 
brake  pulsation  and  rotor  damage. 
To avoid 
expensive  brake  repairs,  evenly tighten  the  wheel 
nuts  in  the  proper  sequence and to

Page 248 of 406

PONTIAC FIREBIRD 1998  Owners Manual Replace  the jack, wheel  wrench  and  flat tire  using  the 
storage  instructions.  When 
you replace  the  trim  panel, 
be  sure  to  tuck  it  under  the  weatherstrip. 
1. 
2. 
3. 
4. 
5. 
6. 
7

Page 249 of 406

PONTIAC FIREBIRD 1998  Owners Manual Compact Spare Tire 
Although  the  compact  spare  tire  was  fully  inflated  when 
your vehicle was new, it can  lose air after  a  time.  Check 
the inflation  pressure  regularly. It should be 60

Page 250 of 406

PONTIAC FIREBIRD 1998  Owners Manual Don’t  use  your  compact spare on  other  vehicles. 
And  don’t  mix  your  compact  spare  tire  or wheel  with 
other  wheels  or  tires.  They  won’t  fit.  Keep  your  spare 
tire  and  its

Page 251 of 406

PONTIAC FIREBIRD 1998  Owners Manual I NOTICE: 
Spinning  your  wheels  can  destroy  parts  of  your 
vehicle  as 
well as the  tires.  If you spin  the  wheels 
too  fast  while  shifting  your  transmission  back  and  forth,  you  ca

Page 254 of 406

PONTIAC FIREBIRD 1998  Owners Manual Section 6 Service  and  Appearance  Care 
Here  you  will find information  about  the care  of your  vehicle.  This section  begins  with  service  and  fuel information, 
and  then  it shows  how  t

Page 288 of 406

PONTIAC FIREBIRD 1998  Owners Manual What to Add 
When you do need brake fluid, use only DOT-3 brake 
fluid. Use new brake  fluid from a sealed  container  only. 
Refer 
to “Recommended  Fluids  and  Lubricants”  in  the 
Maintenance