Page 252 of 395

Section 6 Service  and  Appearance  Care 
Here  you  will  find  information  about  the  care  of  your  vehicle.\
 This section  begins  with  service  and fuel information, 
and  then  it 
shows how to  check  important  fluid  and  lubricant  levels.  There  is also technical  information about your 
vehicle, and  a  part  devoted  to its  appearance  care. 
6-2 
6-3 
6-5 
6-6 
6-9 
6-9 
6-13 
6- 17 
6-20 
6-23 
6-26 
6-26 
6-27 
6-28 
6-32 
6-32 
6-40 
Service 
Fuel 
Fuels  in Foreign  Countries 
Filling  Your 
Tank 
Filling  a  Portable  Fuel  Container 
Checking  Things  Under  the  Hood 
Engine 
Oil 
Air  Cleaner 
Automatic  Transaxle  Fluid 
Engine  Coolant 
Radiator  Pressure  Cap 
Power  Steering  Fluid 
Windshield  Washer  Fluid  Brakes 
Battery 
Bulb  Replacement Windshield  Wiper  Blade  Replacement 
6-4 1 
6-49 
6-49 
6-5 
1 
6-52 
6-54 
6-54 
6-56 
6-57 
6-58 
6-64 
6-65 
6-65  6-66 
6-66 
6-66 
Tires 
Appearance  Care 
Cleaning  the  Inside  of  Your  Vehicle 
Care 
of Safety  Belts 
Cleaning  the  Outside  of  Your  Vehicle 
Cleaning  Aluminum  or  Chrome  Wheels 
(If Equipped) 
Sheet  Metal  Damage 
Appearance  Care  Materials  Chart 
Vehicle  Identification  Number 
(VIN) 
Electrical  System 
Replacement  Bulbs 
Capacities  and  Specifications 
Air  Conditioning  Refrigerants 
Engine  Specifications 
Normal  Maintenance  Replacement 
Parts 
Vehicle  Dimensions 
6-1  
     
        
        Page 260 of 395

Filling a Portable Fuel Container 
I 
1 A CAUTION: I 
Never fill a  portable  fuel  container  while  it is  in 
your vehicle.  Static electricity  discharge from the 
container  can  ignite  the  gasoline  vapor.  You can 
be  badly  burned  and  your  vehicle  damaged 
if this 
occurs. To help  avoid injury to you  and  others: 
Dispense  gasoline  only  into approved 
containers. 
Do not  fill a container  while it is  inside  a 
vehicle,  in  a vehicle’s  trunk, pickup  bed or 
on any  surface  other than the  ground. 
inside  of the  fill  opening  before  operating 
the  nozzle.  Contact  should  be maintained 
until  the  ring 
is complete. 
Bring  the  fill  nozzle  in  contact  with  the 
Don’t  smoke  while  pumping  gasoline. 
Checking  Things  Under the Hood 
The  following  sections  tell you how  to  check fluids, 
lubricants  and  important  underhood parts. 
A CAUTION: 
I 
An electric  fan  under  the  hood  can start up  and 
injure  you  even  when  the  engine 
is not running. 
Keep  hands,  clothing  and tools  away from any 
underhood  electric  fan. 
A CAUTION: 
Things  that burn  can  get  on  hot  engine  parts and 
start a  fire.  These  include  liquids  like  gasoline, 
oil,  coolant,  brake fluid,  windshield  washer  and 
other  fluids,  and plastic  or rubber.  You or others 
could  be  burned.  Be  careful  not  to drop  or spill 
things  that 
will burn onto a hot  engine. 
I 
6-9  
     
        
        Page 262 of 395
3800 Series I1 Engine (L36 - Code K) 
When you open  the hood,  you'll  see: 
A.  Engine  Coolant 
Recovery Tank 
B. Battery 
C.  Radiator  Pressure  Cap 
D. Engine  Oil Dipstick 
E. Engine Oil Fill  Cap 
E Automatic Transaxle 
Fluid Dipstick 
G. Brake Master  Cylinder 
H. Air Cleaner 
I. Windshield  Washer 
Fluid Reservoir 
6-11  
     
        
        Page 263 of 395
3800 Supercharged  Engine (L67 - Code 1) (If Equipped) 
When you open the hood, you’ll see: 
A. Engine Coolant 
Recovery  Tank 
B.  Battery 
C.  Radiator Pressure  Cap D. Engine Oil Dipstick G. Brake Master Cylinder 
E.  Engine Oil Fill Cap 
H. Air Cleaner 
E Automatic Transaxle I. Windshield  Washer 
Fluid  Dipstick  Fluid Reservoir  
     
        
        Page 274 of 395

Engine  Coolant 
The  cooling s stem  in  your  vehicle  is  filled  with 
DEX-COOL 
8 engine  coolant.  This  coolant  is  designed 
to  remain  in your  vehicle  for 
5 years  or 150,000 miles 
(240 000 km) whichever  occurs  first,  if  you  add  only 
DEX-COOL’  extended life coolant. 
The  following  explains  your  cooling  system  and 
how  to add  coolant  when  it  is low.  If  you  have  a 
problem  with  engine  overheating, 
see “Engine 
Overheating” 
in the  Index. 
A 50/50 mixture  of water  and  DEX-COOL@ 
coolant  will: 
Give  freezing  protection  down  to -34°F (-37°C). 
0 Give boiling  protection up to 265 “F (129°C). 
0 Protect  against  rust and corrosion. 
Help  keep  the proper  engine  temperature. 
Let  the  warning  lights and gages  work as 
they  should. 
NOTICE: 
When  adding  coolant,  it is  important that  you 
use only DEX-COOL@ (silicate-free)  coolant. 
If coolant other than  DEX-COOL  is  added  to 
the  system,  premature  engine, heater core or 
radiator  corrosion  may  result.  In addition,  the 
engine  coolant 
will require  change sooner -- at 
30,000 miles (50 000 km) or 24 months, 
whichever  occurs  first.  Damage  caused  by  the 
use  of coolant  other  than DEX-COOL@ 
is not 
covered  by  your new  vehicle  warranty. 
6-23  
     
        
        Page 275 of 395

What to Use 
Use  a mixture of one-half clean water (preferably 
distilled) and one-half DEX-COOL@ coolant  which 
won’t 
damage aluminum parts. If you use this mixture, 
you 
don’t  need to add anything else. 
Adding  only  plain  water to your cooling system 
can  be  dangerous.  Plain water, or some other 
liquid 
like alcohol,  can  boil  before the proper 
coolant  mixture  will.  Your  vehicle’s  coolant 
warning  system 
is set  for  the proper  coolant 
mixture.  With  plain  water or the  wrong  mixture, 
your  engine  could  get  too  hot but  you  wouldn’t 
get  the overheat  warning. Your engine  could 
catch  fire and 
you or others  could  be  burned. 
Use 
a 50/50 mixture of clean  water and 
DEX-COOL@ coolant. 
NOTICE: 
If you  use  an improper  coolant mixture, your 
engine  could  overheat and be  badly  damaged. 
The  repair  cost  wouldn’t  be  covered  by  your 
warranty.  Too much  water  in the  mixture  can 
freeze  and crack the  engine, radiator,  heater core 
and  other parts. 
If you have to add coolant more  than  four times a year, 
have your dealer check your cooling system. 
I NOTICE: 
If you use the proper  coolant,  you  don’t  have  to 
add  extra  inhibitors  or additives  which  claim  to 
improve  the system.  These  can be harmful. 
6-24  
     
        
        Page 276 of 395
Checking Coolant 
When your  engine is cold,  the  coolant  level  should be at 
the 
FULL COLD mark  or  a  little  higher.  When  your 
engine  is 
warm, the  level  should  be  up  to  the FULL 
HOT mark or  a  little  higher. 
LOW 
COOLANT 
- If this  light  comes  on,  it 
means  you’re 
low on 
engine  coolant. 
Adding  Coolant 
If you need  more  coolant,  add the proper DEX-COOL@ 
coolant mixture ut the coolant recovery tank, but  be 
careful  not  to  spill  it. 
~~~  ~~ 
lbrning the radiator  pressure  cap  when  the 
engine  and  radiator are hot  can  allow  steam 
and  scalding  liquids  to blow  out and  burn 
you 
badly.  With  the  coolant  recovery tank, you  will 
almost  never  have  to add  coolant  at the  radiator. 
Never  turn the radiator  pressure  cap 
-- even a 
little 
-- when  the  engine  and  radiator are hot. 
6-25  
     
        
        Page 277 of 395
Thermostat 
Engine  coolant  temperature  is  controlled by a  thermostat 
in the  engine  coolant  system.  The  thermostat stops the 
You can  be  burned  if  you spill  coolant  on  hot 
engine  parts.  Coolant  contains  ethylene  glycol,  and  it  will burn  if the  engine  parts 
are hot 
enough.  Don’t  spill  coolant  on  a 
hot engine. 
Radiator Pressure  Cap 
ICE: 
~~~ 
Your radiator  cap is a 15 psi (105 Wa) 
pressure-type  cap  and  must  be  tightly  installed  to 
prevent  coolant  loss  and possible  engine  damage 
from overheating.  Be sure the  arrows on the cap 
line  up  with  the  overflow  tube  on  the  radiator 
filler  neck. 
flow of coolant  through  the  radiator  until  the  coolant 
reaches  a  preset  temperature. 
Power  Steering Fluid 
The  power  steering  fluid  reservoir  is located  on  the  rear 
passenger  side 
of the  engine  compartment. 
6-26