1998 MITSUBISHI MONTERO Wiring diagram

Fig. 5: Charging System Wiring Diagram (3000GT)

Fig. 6: Charging System Wiring Diagram (Eclipse 2.0L Non-Turbo)

Fig. 7: Charging System Wiring Diagram (Eclipse 2.0L Turbo & 2.4L)

Fig. 8: Charging System Wiring Diagram (Galant)

Fig. 9: Charging System Wiring Diagram (Mirage)

Fig. 10: Charging System Wiring Diagram (Montero)

Fig. 11: Charging System Wiring Diagram (Montero Sport)

stops. Disconnect fresh/recirculated air selector cable and
temperature control cable. Remove knee protector. Remove lap duct and
left shower duct. See Fig. 1. Disconnect mode selector cable.
2) Remove heater control panel cover and panel. Remove heater
control panel bezel and knobs. Remove blower switch. Using a
screwdriver, remove wire clips. Remove heater control cables from
heater control panel. To install, reverse removal procedure. Adjust
heater control cables. See ADJUSTMENTS.
BLOWER ASSEMBLY
Removal & Installation
Remove glove box, speaker cover and speaker or corner cover.
See Fig. 1 . Remove glove box frame. Disconnect right shower duct.
Remove engine control relay and bracket. Disconnect fresh/recirculated
air selector cable and joint duct. Remove blower assembly. To install,
reverse removal procedure. Adjust air selector cable. See ADJUSTMENTS.
WIRING DIAGRAMS