Page 27 of 400

The electronic cluster has all of the same warning lights as the
mechanical cluster, however, some of the gauges will be electronic
instead of analog. In addition, the electronic cluster has a fuel
computer which displays fuel economy, distance to empty and
outside air temperature.
Engine Coolant Temperature Gauge
This gauge shows you the temperature of the engine coolant and
is identified by a thermometer symbol. The letter H means
that the coolant is hot, C means that it is cold, and NORMAL
means that the coolant is within the normal operating range.
The indicator bar on the graph will move into the normal operating
range as the engine warms up. When you are in heavy traffic
or stop-and-go driving in hot weather, the gauge may read at the
very top of the NORMAL range. This is acceptable.
However, if the indicator bar on the graph moves into the H
(hot) position, the engine is overheating and may be damaged. If
this happens, you should stop your vehicle as soon as safely
possible. Turn off the engine and let it cool. Check the coolant level
to be sure that it is at the proper level. If your vehicle needs
more coolant, seeEngine coolantin the Index and read the section
regardingadding coolant.
Instrumentation
23
Page 49 of 400

How to Take Care of and Clean Your CD Changer and
Discs
To ensure the continued performance of your Ford Compact Disc
Changer, carefully read the following precautions:
mAlways handle the disc by its edge. Never touch the playing
surface.
mBefore playing, inspect the disc for any contamination. If
needed, clean the disc with an approved disc cleaner, such as the
DiscwashertCompact Disc Cleaner or the Allsop 3t
Compact Disc Cleaner, by wiping from the center out to the
edges.Do not use a circular motion to clean.
mDo not clean discs with solvents such as benzene, thinner,
commercially available cleaners or antistatic spray
intended for analog records.
mDo not expose the disc to direct sunlight or heat sources such
as defroster and floor heating ducts. Do not leave any discs in
a parked car in direct sunlight where there may be a
considerable rise in temperature or damage may result.
mAfter playing, store the disc in its case.
mIf a disc has already been inserted, do not try to insert another
disc. Doing so may damage the disc changer.
mDo not insert anything other than a disc into the disc changer.
WARNING
The laser beam used in the compact disc player is harmful
to the eyes. Do not attempt to disassemble the case.
Electronic Sound Systems
45
Page 61 of 400

WARNING
Operating with the function selector control in off or in
the recirculated air mode for extended periods of time in
cold weather can result in fog buildup on interior glass
surfaces.
mThe Mix () button directs approximately equal amounts
of air to the windshield and floor outlets with a small
amount to the side windows.
mThe Defrost (
) button directs air to the windshield and
front side windows with a small amount going to the floor
outlets.
mThe Panel (
) button directs air to the instrument panel
outlets.
mThe Panel/Floor (
) button directs approximately equal
amounts of air to the instrument panel outlets and the floor
outlets.
mThe Floor (
) button directs most of the system's air
supply to the floor outlets with a small amount going to the
windshield and side window defrosters.
Air Outlets
Air intake selector button
The typical air intake selection is outside air. However, for
recirculated air, the air intake selector button may be activated.
When the air intake selector button is activated (indicator light is
on), it prevents the intake of outside air. This is the typical
selection when using the air conditioner (if equipped). It
recirculates interior air for faster cooling. The recirculated air
function also helps to prevent the intake of dusty or unpleasant air.
Controls and Features
57
Page 83 of 400

WARNING
The Daytime Running Light (DRL) system will not
illuminate the tail lamps and parking lamps. Turn on your
headlamps at dusk. Failure to do so may result in a
collision.
Lighting Up the Instrument Panel
The instrument panel lights can be turned on by turning the
headlamp control knob to either the first or second position. You
can brighten or dim the instrument panel lights with the DIM
switch. The DIM switch is located near the headlamp controls.
Pushing and holding the right side of the switch will continue to
brighten the lights until the maximum brightness is reached.
Release the switch to maintain the desired brightness. To dim the
instrument panel lights, push the left side of the switch.
Autolamp On/Off Delay System (If equipped)
The autolamp sets the headlamps to turn on and off automatically.
You can use the autolamp to:
mturn on the headlamps automatically at night
mturn off the headlamps automatically during daylight
The instrument panel brightness control
Controls and Features
79
Page 90 of 400
Ignition
Understanding the Positions of the Ignition
Your vehicle's ignition has four positions. They are:
OFF/LOCK allows you to shut off the engine and all
accessories and locks the gearshift lever. Removing the key then
locks the steering wheel.
ACCESSORY allows you to operate some of your vehicle's
electrical accessories while the engine is not running. For example,
you can use ACCESSORY to turn on the radio, windshield
wipers, or operate the cigarette lighter without starting the engine.
ON allows you to test your vehicle's warning lights to make
sure they work before you start the engine. The key returns to the
ON position once the engine is started and remains in this
position while the engine runs.
START cranks the engine. Release the key once the engine starts
so that you don't damage the starter. The key should return
to the ON position when you release it.
The ignition positions
86
Page 100 of 400

When the CRUISE indicator blinks, press the speed control OFF
switch and have the system checked by your Ford or
Lincoln-Mercury dealer.
The CRUISE indicator light may blink if the CRUISE CONT. ON
switch is pressed while pushing the RES/ACCEL,
COAST/SET, or CANCEL buttons located on the left side of the
steering wheel.
Power Sunroof (If equipped)
The power sunroof controls are found in the overhead console.
The power sunroof operates with the ignition in the ON position.
To open the sunroof, press and hold the OPEN side of the
switch. Release the switch when the sunroof reaches the desired
position. To close the sunroof, press the CLOSE side of the switch.
When the sunroof panel is closed, you can raise the sunroof to the
vent position by pressing the UP side of the switch. To lower the
moonroof from the vent position, press the DOWN side of the switch.
WARNING
Do not let children play with the moon roof. They may
seriously hurt themselves.
Remove any snow, water or other foreign matter from the
sunroof before you open it.
Power sunroof controls
96
Page 108 of 400
WARNING
Make sure that the liftgate door and/or window are closed
to prevent exhaust fumes from being drawn into the
vehicle. This will also prevent passengers and cargo from
falling out. If you must drive with the liftgate door or
window open, keep the vents open so outside air comes into
the vehicle.
Closing the Liftgate
To close the liftgate, reach up and pull the handle on the inner
trim panel downward.
When you have pulled down the liftgate enough so that you can
reach the license plate light shield, push the shield down and
forward to close the liftgate. At this point, the liftgate is not locked.
The liftgate window in the open position
104
Page 132 of 400

Rear Seat Cupholders (available on some models)
Your vehicle may have the following types of cupholders:
mtwo second row cupholders attached to the captain seats (if
equipped)
mtwo third row cupholders on the left side and one cupholder
on the right side (if equipped)
mone cupholder built into the side trim panel (without rear
radio controls)
WARNING
Objects stored on the ledges below the rear side windows
can become dangerous projectiles during a sudden stop
or collision. Put small objects only in the storage
compartments.
Third Row Seat Storage Compartment (If equipped)
Your vehicle may come equipped with a folding cupholder/storage
tray/storage compartment built into the passenger's side of the
third row seat. Find the indented ledge on the right of the
cupholder and pull it up to reveal the storage compartment.
Power Point Electrical Outlet (If equipped)
Your vehicle may be equipped with a 12 volt power point outlet
located just below the rear seat audio controls. The power
point can be used in place of the cigarette lighter for optional
electrical accessories.
NOTE: Do not plug the cigarette lighter into this power point
electrical outlet. Use the cigarette lighter.
128