1998 Mercury Mountaineer door lock

[x] Cancel search: door lock

Page 12 of 216

Mercury Mountaineer 1998  Owners Manuals Key-in-ignition warning chime
Sounds when the key is left in the
ignition in the OFF/LOCK or ACC
position and the drivers door is
opened.
Headlamps on warning chime
Sounds when the headlamps or
parki

Page 40 of 216

Mercury Mountaineer 1998  Owners Manuals One touch down
²Press AUTO and release quickly.
The window will open fully.
Depress again to stop window
operation.
Window lock
The window lock feature allows
only the driver to operate the
power win

Page 41 of 216

Mercury Mountaineer 1998  Owners Manuals If the vehicle is equipped with the
optional perimeter alarm system,
this feature will work from all
doors.
CHILDPROOF DOOR LOCKS
When these locks are set, the rear
doors cannot be opened from the
ins

Page 43 of 216

Mercury Mountaineer 1998  Owners Manuals POSITIVE RETENTION FLOOR
MAT
Position the floor mat so that the
eyelet is over the pointed end of
the retention post and rotate
forward to lock in. Make sure that
the mat does not interfere with the
o

Page 46 of 216

Mercury Mountaineer 1998  Owners Manuals 5. Let go of the right end cap. The
clutch will now engage and stop
the shade from losing its spring
tension.
6. Unfold the vinyl and place it
into the end cap slots.
7. Insert the shade into the side

Page 47 of 216

Mercury Mountaineer 1998  Owners Manuals Locking the doors
Press this control to lock all doors.
To confirm all doors are closed and
locked, press the control a second
time within five seconds. The
doors will lock again, the horn will
chirp

Page 49 of 216

Mercury Mountaineer 1998  Owners Manuals Replacing lost transmitters
Take all your vehicles transmitters
to your dealer for reprogramming
if:
²a transmitter is lost or
²you want to purchase additional
transmitters (up to four may be
progr

Page 50 of 216

Mercury Mountaineer 1998  Owners Manuals door(s) or sound the personal
alarm.
The system automatically turns off
after 25 seconds or when the
ignition is turned to the START or
ACC position. The dome lamp
switch (if equipped) mustnotbe
set t
Page:   1-8 9-16 17-24 next >