1998 Mercury Mountaineer ignition

[x] Cancel search: ignition

Page 135 of 216

Mercury Mountaineer 1998  Owners Manuals HAZARD LIGHTS CONTROL
Use only in an emergency to warn
traffic of vehicle breakdown,
approaching danger, etc. The
hazard flashers can be operated
when the ignition is off.
²The hazard lights control

Page 142 of 216

Mercury Mountaineer 1998  Owners Manuals Always replace the cover
to the Power Distribution
Box before reconnecting the
battery or refilling fluid
reservoirs.
The high-current fuses are coded
as follows.
Fuse/Relay
LocationFuse Amp
RatingDes

Page 149 of 216

Mercury Mountaineer 1998  Owners Manuals 12. Stow the flat tire, jack and lug
wrench. Make sure the jack is
fastened so it does not rattle when
you drive.
13. Turn ON the air suspension
switch (if equipped).
14. Unblock the wheels.
JUMP STAR

Page 176 of 216

Mercury Mountaineer 1998  Owners Manuals turn the ignition to ACC, then turn
the wipers on. When the wipers
reach the vertical position, turn
the ignition to LOCK.
To replace the wiper blades:
1. Pull the wiper arm away from
the windshield a

Page 188 of 216

Mercury Mountaineer 1998  Owners Manuals ²Do not turn off the ignition
while your vehicle is moving,
especially at high speeds.
²Have the services listed in your
ªService Guideº performed
according to the specified
schedule.
The Schedule

Page 209 of 216

Mercury Mountaineer 1998  Owners Manuals applications must add 118ml
(4 oz.) of additive friction modifier
C8AZ-19B546±A, Ford specification
EST-M2C118±A to the rear axle
whenever the axle has been
serviced.
ENGINE DATA
Engine 5.0L engine

Page 214 of 216

Mercury Mountaineer 1998  Owners Manuals improving fuel economy ........134
octane rating ...........................185
quality ......................................186
safety information relating to
automotive fuels .....................1
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40