mode. The air will be heated or
cooled based on the
temperature selection. For
added customer comfort, the air
distributed through the floor
ducts will be slightly warmer
than the air sent to the
instrument panel registers.
²
-Allows for maximum
heating by distributing outside
air through the floor ducts.
However, the air cannot be
cooled below the outside
temperature because the air
conditioning does not operate in
this mode.
²
-Distributes outside air
through the windshield defroster
ducts and the floor ducts.
Heating and air conditioning
capabilities are provided in this
mode. The air will be heated or
cooled based on the
temperature selection. For
added customer comfort, the air
distributed through the floor
ducts will be slightly warmer
than the air sent to the
windshield defroster ducts. If
the temperature is about 10ÉC
(50ÉF) or higher, the air
conditioner will automatically
dehumidify the air to prevent
fogging.
²FRONT
-Distributes
outside air through the
windshield defroster ducts. It
can be used to clear ice or fog
from the windshield. If the
outside air temperature is about
Controls and features
31
