1998 Lexus LS400 Reset radio

AIR CONDITIONING AND AUDIO
133
1
Turning the system on and adjusting volume
(See page 134 for details.)
2
Stopping and ejecting a cassette tape
(See page 140 for details.)
3
Function buttons
1 6:Station selector buttons
(See page 138 for details.)
SCAN:Scan tuning
(See page 139 for details.)
P. SCAN: Preset scan tuning
(See page 139 for details.)
4
Display of functions in TAPE mode

:
Side change
(See page 141 for details.)
:DOLBY NR
(See page 140 for details.)
:Rewinding
(See page 141 for details.)

:Fast forwarding
(See page 141 for details.)
RPT:Automatic repeat
(See page 141 for details.)
SKIP:Automatic skip of blank portions of tape
(See page 141 for details.)
SCAN:Scan selection
(See page 142 for details.)
4
Display of functions in CD mode
:Disc selection
(See page 146 for details.)
:Reversing
(See page 147 for details.)

:Fast forwarding
(See page 147 for details.)
RPT:Automatic repeat
(See page 148 for details.)
RAND:Random access
(See page 148 for details.)
SCAN:Scan selection
(See page 146 for details.)
5
Mode selectors
(See page 134 for details.)
6
Cassette tape slot
(See page 140 for details.)
7
Automatic sound levelizer
(See page 136 for details.)
8
Tone and balance knobs
(See page 135 for details.)
9
Radio mode:Frequency tuning
(See page 137 or 139 for details.)
TAPE mode:Direct access to a desired program
(See page 142 for details.)
CD mode:Direct access to a desired program
(See page 147 for details.)

AIR CONDITIONING AND AUDIO
138
20L0461
Push this button on the upper side to step up the station band or
on the lower side to step down.
Your radio automatically changes to stereo reception when a stereo
broadcast is received. ”ST” appears on the display. If the signal
becomes weak, the radio reduces the amount of channel separation
to prevent the weak signal from creating noise. If the signal becomes
extremely weak, the radio switches from stereo to mono reception.
In this case, ”ST” disappears from the display.(b) Presetting a station
20L047-1
1. Tune in the desired station.
2. Push one of the station selector buttons ( 16 ) and hold it until
a beep is heard. This sets the station to the button and the button
number ( 16 ) appears on the display.
Each button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power source is
interrupted by battery disconnection or a blown fuse.

AIR CONDITIONING AND AUDIO
139 (c) Selecting a station
Your Lexus has an electronic tuning radio ( ETR ). Tune in the
desired station using one of the following methods.
20L056
Preset tuning: Push the button ( 16 ) for the station you want. The
button number ( 16 ) and station frequency appear on the display.
Manual tuning: Push the ”TUNE SEEK” button briefly. Each time
you push the button, the radio will step up or down to another
frequency.
Seek tuning: Push the ”TUNE SEEK” button and hold it until you
hear a beep. The radio will begin seeking up or down for a station
of the nearest frequency and will stop on reception. Each time you
push the button, the stations will be searched out one after another.
20L0481
To scan all the frequencies: Push the ”SCAN” button. ”SCAN”
appears on the display. The radio will find the next station up the
band, stay there for a few seconds, and then scan again. To select a
station, push the ”SCAN” button a second time.
To scan the preset stations: Push the ”P.SCAN” button. ”P.SCAN”
appears on the display. The radio will tune in the next preset station
up the band, stay there for a few seconds, and then move to the next
preset station. To select a station, push the ”P.SCAN” button a
second time.