1998 Lexus LS400 phone

AIR CONDITIONING AND AUDIO
149 Radio reception
Usually, the problem with radio reception does not mean there is a
problem with your radio it is just the normal result of conditions
outside the vehicle.
For example, nearby buildings and terrain can interfere with FM
reception. Power lines or telephone wires can interfere with AM
signals. And of course, radio signals have a limited range, and the
farther you are from a station, the weaker its signal will be. In
addition, reception conditions change constantly as your vehicle
moves.
Here are some common reception problems that probably do not
indicate a problem with your radio:
FM
Fading and drifting stations Generally, the effective range of FM
is about 40 km (25 miles). Once outside this range, you may notice
fading and drifting, which increase with the distance from the radio
transmitter. They are often accompanied by distortion.
Multipath FM signals are reflective, making it possible for two
signals to reach your antenna at the same time. If this happens, the
signals will cancel each other out, causing a momentary flutter or
loss of reception.
Static and fluttering These occur when signals are blocked by
buildings, trees, or other large objects. Increasing the bass level may
reduce static and fluttering.Station swapping If the FM signal you are listening to is
interrupted or weakened, and there is another strong station nearby
on the FM band, your radio may tune in the second station until the
original signal can be picked up again.
AM
Fading AM broadcasts are reflected by the upper atmosphere
especially at night. These reflected signals can interfere with those
received directly from the radio station, causing the radio station to
sound alternately strong and weak.
Station interference When a reflected signal and a signal received
directly from a radio station are very nearly the same frequency, they
can interfere with each other, making it difficult to hear the
broadcast.
Static AM is easily affected by external sources of electrical noise,
such as high tension power lines, lightening, or electrical motors.
This results in static.
Caring for your cassette player and tapes
For high performance from your cassette player and tapes:
Clean the tape head and other parts regularly.
A dirty tape head or tape path can decrease sound quality and
tangle your cassette tapes. The easiest way to clean them is by
using a cleaning tape. (A wet type is recommended.)

ELECTRICAL COMPONENTS
252
No.FUSEAMPERECIRCUIT
23 AIR SUS20Height control system
24 D RR
DOOR20Rear door lock,
Rear power window
25 HORN10Horns
26 ETCS15Electronic throttle control system
27 HLP L
UPR10Lefthand headlight (high beam)
28 HLP R
UPR10Righthand headlight (high beam)
29 EFI NO.210Emission control system
30 MIRHTR15Outside rear view mirror defogger
31 FR S/HTR15Seat heater
32 ALTS7.5Charging system
33 TEL15Telephone
34 CRT15Multi information display
35 RADIO
NO.120Audio system
36 MPXB10Power window, Door lock,
Tilt and telescopic steering
37 ECUB7.5Vehicle skid control system,
Daytime running light system
38 HAZ10Emergency flashers
No.FUSEAMPERECIRCUIT
39 EFI NO.120Multiport fuel injection
system/sequential multiport fuel
injection system
40 DOME10Interior light, Vanity lights,
Foot lights, Rear personal light,
Garage door opener
41 OBD7.5Onboard diagnosis system
42 DRL10Vehicles sold in Canada
Daytime running light system
43 HLP R
LW R15Righthand headlight (low beam)
44 HLP L
LW R15Lefthand headlight (low beam)