Page 175 of 304
STARTING AND DRIVING
160
AUTOMATIC TRANSMISSION
Your automatic transmission has a shift lock system to minimize
the possibility of incorrect operation. This means you can only
shift out of ”P” position when the brake pedal is depressed with
the ignition switch in ”ON” position. ()
31L078
The shift position is displayed on the instrument cluster.P:Parking, engine starting and key removal position
R:Reverse position
N:Neutral position
D:Normal driving position (Shifting into overdrive possible)
4:Position for engine braking (Shifting into overdrive not
possible)
When the cruise control is being used, even if you downshift
from ”D” to ”4”, engine braking will not be applied because
the cruise control is not cancelled. For the operation to
decrease the vehicle speed, see page 170.
3, 2:Position for more powerful engine braking
L:Position for maximum engine braking
Page 190 of 304

STARTING AND DRIVING
175
Vehicle skid control failure warning
31L073
In the following cases, the warning message appears and the
reminder light next to the warning message and the ”VSC OFF”
indicator light come on. And the warning tone also sounds.
(a) After the removal of the battery terminals (See ”Initial
adjustment of vehicle skid control system” described below.)
(b) If the vehicle skid control system malfunctions
If the message appears for the cause of (b), have your vehicle
checked by Lexus dealer as soon as possible.
Although the message appears, there is no problem to continue your
normal driving.
Initial adjustment of vehicle skid control system
After the battery terminals are disconnected, an initial adjustment
should be made. At this time, the reminder light comes on and the
warning message appears in the multi information display.
Make an initial adjustment in the following ways:
1. Apply the parking brake and put the transmission in ”P”.
2. Connect the battery terminals.
3. Turn the ignition switch on. At this time, the ”VSC OFF”
indicator light comes on and then about 6 seconds later, the reminder
light comes on and the ”CHECK VSC” warning message appears in
the multi information display.
4. The warning message and the ”VSC OFF” indicator light go out
about 15 seconds after the ignition switch is turned on. If the vehicle
is shaken after the ignition switch is turned to ”ON”, it may take
longer to go out the warning message.
If the warning message does not go out about 1 minute after you turn
the ignition switch on, turn it off and then on again.
If the vehicle is on the moving object like a ship or turntable, an
accurate adjustment cannot be made. Move the vehicle on the
ground (or the part not causing vibrations to the vehicle) and make
an adjustment from step 1.
Page 193 of 304

STARTING AND DRIVING
178”ABS” warning light
31L019-2
This light comes on when the ignition key is turned to the ”ON”
position. After about a few seconds, the light will go off.
If either of the following conditions occurs, this indicates a
malfunction somewhere in the parts monitored by the warning light
system. Contact your Lexus dealer as soon as possible to service the
vehicle.
The light does not come on as described above, or remains on.
The light comes on while driving.
Even if the anti lock brake system should fail, the brake system will
still operate conventionally. But when the ”ABS” warning light is
on (and the brake system warning light is off), anti lock brake
system is not assisting brake performance so that the wheels could
lock up during a sudden brake or braking on slippery road surfaces.
Have your vehicle checked by your Lexus dealer as soon as possible.
Drum in disc type parking brake system
Your vehicle has a drum in disc type parking brake system. This
type of brake system needs bedding down of the brake shoes
periodically or whenever the parking brake shoes and/or drums are
replaced.
Have your Lexus dealer perform the bedding down.
Brake pad wear limit warning message
31L082
When your brake pads are worn enough to require replacement,
the brake pad wear warning message in the multi information
display appears.
If the warning message in the multi information display appears
while driving, have the brake pads checked and replaced by your
nearest Lexus dealer immediately.
Continuous driving without replacing the brake pads will cause
expensive rotor damage and increasing brake pedal effort to get the
same stopping distance.
Page 247 of 304