1998 Lexus ES300 change wheel

COMFORT ADJUSTMENT57
FRONT SEATS
Front seat precautions
CAUTION
The SRS side airbags are installed in the driver and front
passenger seats. Observe the following precautions.
Do not lean over the front door when the vehicle is in use.
The side airbag inflates with considerable speed and force;
you may be killed or severely injured.
 Do not modify or replace the seats or the surface of the seats
with side airbags. Such changes may disable the system, or
cause the side airbags to inflate, resulting in death or
serious injury. Consult your Lexus dealer.
 Do not use accessories for the seats which cover the parts
where the side airbags should inflate. Such accessories may
prevent the side airbags from activating correctly, causing
death or serious injury.
Seat adjustment precautions
Adjust the driver's seat so that the foot pedals, steering wheel and instrument
panel controls are within easy reach of the driver.
CAUTION
 Do not adjust the seat while the vehicle is moving as the seat
may unexpectedly move and cause the driver to lose control
of the vehicle.
 Be careful not to hit the seat against a passenger, luggage or
the rear seat.
NOTICE
Do not operate the control switch in more than one dimension at a time.
It may cause electrical overload.

COMFORT ADJUSTMENT
62
TILT STEERING WHEEL
16E009
To change the steering wheel angle, hold the steering wheel, pull up the
lock release lever, tilt the steering wheel to the desired angle and release
the lever.
When the steering wheel is in a low position, it will spring up as you relea\
se
the lock release lever.
CAUTION
Do not adjust the steering wheel while the vehicle is moving.
 After adjusting the steering wheel, try moving it up and
down to make sure it is locked in position.
OUTSIDE REAR VIEW MIRRORS
16E010
Adjust the mirror so you can just see the side of your vehicle in the mirror.
Be careful when judging the size or distance of any object seen in the out\
side
rear view mirror on the passenger's side. It is a convex mirror with a curved
surface. Any object seen in a convex mirror will look smaller and farther away
than if seen in a normal flat mirror.
When you push the rear window defogger switch, the heater panels in the
outside rear view mirrors will quickly clear the surface.

COMFORT ADJUSTMENT
78
16E127
Do not attach a cup holder or any other device on or around the door.
When the side airbag inflates, the cup holder or any other device will
be thrown with great force, or the side airbag may not activate
correctly, resulting in death or serious injury. Likewise, the driver
and front passenger should not hold things in their arms or on their
knees.
 Do not use accessories for the seats which cover the parts where the
side airbags should inflate. Such accessories may prevent the side
airbags from activating correctly, causing death or serious injury.
 Do not modify or remove any wiring. Do not modify, remove, strike
or open any components, such as the steering wheel column cover,
front passenger airbag cover, front seats, airbag sensor assembly or
seat belt assemblies. Doing any of these may cause sudden SRS
operation or disable the system, which could result in death or
serious injury.
 Do not modify or replace the seats or surface of the front seats with
side airbags. Such changes may disable the system or cause the side
airbags to inflate, resulting in death or serious injury. Consult your
Lexus dealer.
Failure to follow these instructions can result in death or serious
injuries.
NOTICE
Do not perform any of the following changes without consulting your
Lexus dealer. Such changes can interfere with proper operation of the
SRS in some cases.
 Installation of electronic items such as a mobile two±way radio,
cassette tape player or compact disc player.
 Modification of the suspension system.
 Modification of the front end structure and side structure of the
passenger compartment.
 Attachment of a grille guard (bull bar, kangaroo bar, etc.), snow plow,
winches or any other equipment to the front end.
 Repairs made on or near the front fenders, front end structure,
console, steering column, steering wheel, dashboard near the front
passenger airbag, front seats or seat belt assembly.

IN CASE OF AN EMERGENCY167
IF YOU HAVE A FLAT TIRE
1. Reduce your speed gradually, keeping a straight line. Move cautiously off
the road to a safe place ± well away from the traffic. Avoid stopping on the
center divider of a highway. Park on a level spot with firm ground.
2. Stop the engine and turn on your emergency flashers.
3. Firmly set the parking brake and put the transmission in ºPº.
4. Have everyone get out of the vehicle on the side away from traffic.
5. Read the following instructions thoroughly.
CAUTION
When jacking, be sure to observe the following to reduce the
possibility of personal injury:
Follow jacking instructions.
 Do not start or run the engine while your vehicle is
supported by the jack.
 Stop the vehicle on a level firm ground, firmly set the
parking brake and put the transmission in ºPº. Block the
wheel diagonally opposite to the one being changed if
necessary.
 Make sure to set the jack properly in the jack point. Raising
the vehicle with jack improperly positioned will damage
the vehicle or may allow the vehicle to fall off the jack and
cause personal injury.
Never get under the vehicle when the vehicle is supported
by the jack alone.
 Use the jack only for lifting your vehicle during wheel
changing.
 Do not raise the vehicle with someone in the vehicle.
 When raising the vehicle, do not put an object on or under
the jack.
 Raise the vehicle only high enough to remove and change
the tire.
NOTICE
Do not continue driving with a deflated tire. Driving even a short distan\
ce
can damage a tire beyond repair.

MAINTENANCE
182
Tire rotation
Rotate the tires every 12000 km (7500 miles). See page 208 for additional
information.
Fluid leaks
Check underneath for leaking fuel, oil, water or other fluid after the vehicl\
e
has been parked for a while. If you smell fuel fumes or notice any leak, h\
ave
the cause found and corrected immediately.
Doors and engine hood
Check
that all doors, including trunk lid, operate smoothly and all latches lo\
ck
securely. Make sure the engine hood secondary latch secures the hood when
the primary latch is released.
Vehicle interior
Items listed below should be checked regularly, e.g. while performing
periodic services, cleaning the vehicle, etc.
Lights
Make sure the headlight, stop lights, tail lights, turn signal lights, and o\
ther
lights are working. Check headlight aim.
Service reminder indicators and warning buzzers
Check that all service reminder indicators and warning buzzers function
properly.
Steering wheel
Check that it has the specified freeplay. Be alert for changes in steering
condition, such as hard steering, excessive freeplay or strange noise.
Seats
Check that all front seat controls such as seat adjusters, seatback recliner, etc.
operate smoothly. Check that the head restraints move up and down smoothly
and that the locks hold securely in any latched position.
Seat belts
Check that the seat belt system such as buckles, retractors and anchors operat\
e
properly and smoothly. Make sure the belt webbing is not cut, frayed, worn
or damaged.

CHASSIS
210
Warning: The traction grade assigned to this tire is based on braking (straigh\
t
ahead) traction tests and does not include cornering (turning) traction.
Temperature A, B, C
± The temperature grades are A (the highest), B, and
C, representing the tire's resistance to the generation of heat and its ability to
dissipate heat when tested under controlled conditions on a specified indoor
laboratory test wheel. Sustained high temperature can cause the material of
the tire to degenerate and reduce tire life, and excessive temperature can \
lead
to sudden tire failure. The grade C corresponds to a level of performan\
ce
which all passenger car tires must meet under the Federal Motor Vehicle
Safety Standard No. 109. Grades B and A represent higher levels of
performance on the laboratory test wheel than the minimum required by law.
Warning: The temperature grade of this tire established for a tire that is
properly inflated and not overloaded. Excessive speed, underinflation, or
excessive loading, either separately or in combination, can cause heat buildup
and possible tire failure.
Tire selection
When replacing a tire, use only the same size and construction as
originally installed and with the same or greater load capacity.
Using any other size or type of tire may seriously affect handling, ride,
speedometer/odometer calibration, ground clearance, and clearance between
the body and tires or snow chains.
Do not mix radial, belted, or conventional tires on your vehicle.
Do not use tires or wheels other than the manufacturer's recommended
size.
It can cause dangerous handling characteristics, resulting in loss of co\
ntrol.
If you need to change from conventional tires to radial tires or vice ve\
rsa,
replace them as a set.
INSTALLING SNOW TIRES AND CHAINS
When to use snow tires or chains
Snow tires or chains are recommended when driving on snow or ice.
On wet or dry roads, conventional or radial tires provide better traction \
than
snow or studded tires.
Snow tire selection
If you need snow tires, select the same size, construction and load capacity
as the original tires on your Lexus.
Do not use tires other than stated above. Since your vehicle has radial t\
ires
as original equipment, make sure your snow tires also have radial
construction. Do not install studded tires without first checking local
regulations for possible restrictions.
Snow tire installation
Snow tires should be installed on all wheels.
Installing snow tires on the front wheels only can lead to an excessive
difference in road grip capability between the front and rear tires which could
cause loss of vehicle control.

CHASSIS
212
REPLACING WHEELS
When to replace your wheels
If you have wheel damage such as bending, cracks or heavy corrosion, the
wheel should be replaced.
If you fail to replace damaged wheels, a tire may slip off a wheel or they may
cause loss of handling control.
Replacement with used wheels is not recommended as they may have been
subjected to rough treatment or high mileage and could fail without warning.
Also, bent wheels which have been straightened may have hidden structural
damage and therefore should not be used. Never use an inner tube in a leaking
wheel which is designed for a tubeless tire.
Wheel selection
When replacing wheels, care should be taken to ensure that they are
equivalent to those removed in load capacity, diameter, rim width, and
offset.
Correct replacement wheels are available at your Lexus dealer.
A wheel of a different size or type may adversely affect handling, wheel and
bearing life, brake cooling, speedometer/odometer calibration, stopping
ability, headlight aim, bumper height, vehicle ground clearance, and tire or
snow chain clearance to the body and chassis.
ALUMINUM WHEEL PRECAUTIONS
 After driving your vehicle the first 1600 km (1000 miles), check that the
wheel nuts are tight.
 If you have rotated, repaired, or changed your tires, check that the whe\
el
nuts are still tight after driving 1600 km (1000 miles).
 When using tire chains, be careful not to damage the aluminum wheels.
 Use only the Lexus wheel nuts and wrench designed for your aluminum
wheels.
 When balancing your wheels, use only Lexus balance weights or
equivalent and a plastic or rubber hammer.
 As with any wheel, periodically check your aluminum wheels for damage.
If damaged, replace immediately.
SUSPENSION AND CHASSIS
CAUTION
Do not modify the suspension/chassis with lift kits, spacers,
springs, etc. It can cause dangerous handling characteristics,
resulting in loss of control.