1998 Lexus ES300 fuel

AIR CONDITIONING AND AUDIO
108
20E007±1
The air intake control button is used to switch the air intake between the
OUTSIDE AIR mode and RECIRCULATED AIR mode.
With the button in the OUTSIDE AIR mode, the OUTSIDE AIR mode
indicator light will come on and the system will take fresh outside air into the
vehicle.
If quick circulation of cooled air is desired, push the air intake control\
button
for RECIRCULATED AIR. The RECIRCULATED AIR mode indicator light
will come on.
For normal use, it is best to keep the air intake control button set to OUT\
SIDE
AIR mode. If recirculated air is used during heating, the windows will \
fog up
more easily.If the engine coolant temperature becomes extremely high, the
RECIRCULATED AIR mode is automatically selected. This is not a
malfunction. When the engine coolant temperature is lowered, the previous
mode resumes.
If manual on±off of the air conditioning is desired ±
Push the ºA/Cº button to turn the air conditioning on and push it agai\
n to turn
the air conditioning off.
The air conditioning does not work if the outside temperature is lowered do\
wn
to around 0C (32F).
If the system is used for ventilation, heating in dry weather or removing \
frost
or exterior fog on the windshield, turn the air conditioning off once it is no
longer required. This will improve fuel economy. The air conditioning can
be used for year±round automatic temperature control including cooling \
and
dehumidifying operation.
If the air conditioning compressor does not operate, the indicator of the \
ºA/Cº
button will blink. If the indicator of the ºA/Cº button blinks even wh\
en the
ºA/Cº button is pushed again, have the compressor checked by your \
nearest
Lexus dealer.
Displaying the outside temperature ±
When you push the ºOUTSIDE TEMPº knob, the temperature display shows
the outside temperature. To return to the display of the current set
temperature, push the knob again. The temperature display ranges from
±30 C (±22F) up to 50C (122F).

STARTING AND DRIVING
132
THREE±WAY CATALYTIC CONVERTERWARM UP THREE±WAY CATALYTIC CONVERTER
31E001±4

1Warm up three±way catalytic converter
2Three±way catalytic converter
Vehicles sold in California;
1 and 2
Vehicles sold outside California;
2 only
The three±way catalytic converter/warm up three±way catalytic
converter is an emission control device installed in the exhaust system.
It looks somewhat like a muffler, but its purpose is to reduce pollutants in the
exhaust gas.
CAUTION
 Keep people and combustible materials away from the
exhaust pipe while the engine is running. The exhaust gas
is very hot.
 Do not drive, idle or park your vehicle over anything that
might burn easily such as grass, leaves, paper or rags.
NOTICE
A large amount of unburned gases flowing into the three±way catalytic\
converter/warm up three±way catalytic converter may cause it to
overheat and create a fire hazard. To prevent this and other damage,
observe the following precautions:
Use only unleaded gasoline.
 Do not drive with an extremely low fuel level; running out of fuel could
cause the engine to misfire, creating an excessive load on the
three±way catalytic converter/warm up three±way catalytic converter.
 Do not allow the engine to run at idle speed for more than 20 minutes.
 Avoid racing the engine.
 Do not push±start or pull±start your vehicle.
 Do not turn off the ignition while the vehicle is moving.

STARTING AND DRIVING133

Keep your engine in good running order. Malfunctions in the engine
electrical system, electronic ignition system/distributor ignition
system or fuel system could cause an extremely high three±way
catalytic converter/warm up three±way catalytic converter
temperature.
 If the engine becomes difficult to start or stalls frequently, take your
vehicle in for a check±up as soon as possible. Remember, your Lexus
dealer knows your vehicle and its three±way catalytic converter/warm
up three±way catalytic converter system best.
 To ensure that the three±way catalytic converter /warm up three±way
catalytic converter and the entire emission control system operate
properly, your vehicle must receive the periodic inspections required
by the Lexus Maintenance Schedule. For scheduled maintenance
information, refer to the separate ºOwner's Manual Supplement/
Maintenance Scheduleº.
ENGINE EXHAUST CAUTION
CAUTION
Avoid inhaling the engine exhaust. It contains carbon
monoxide, which is a colorless and odorless gas. It can
cause unconsciousness or even death.
 Make sure the exhaust system has no holes or loose
connections. The system should be checked from time to
time. If you hit something, or notice a change in the sound
of the exhaust, have the system checked immediately.
 Do not run the engine in a garage or enclosed area except
for the time needed to drive the vehicle in or out. The
exhaust gases cannot escape, making this a particularly
dangerous situation.
 Do not remain for a long time in a parked vehicle with the
engine running. If it is unavoidable, however, do so only in
an unconfined area and adjust the heating or cooling
system to force outside air into the vehicle.
 Keep the trunk lid closed while driving. An open or
unsealed trunk lid may cause exhaust gases to be drawn
into the vehicle. If you must drive with the trunk lid open
to accommodate a large object, close the windows, open all
the dashboard vents and have the heating or cooling system
deliver fresh air into the vehicle by turning the fan to high
speed with the air intake control button in the OUTSIDE
AIR mode.

STARTING AND DRIVING
134
To allow proper operation of your vehicle's ventilation system, keep
the inlet grilles in front of the windshield clear of snow, leaves, or
other obstructions.
 If you smell exhaust fumes in the vehicle, drive with the windows
open and the trunk lid closed. Have the cause immediately located
and corrected.
BEFORE STARTING THE ENGINE
1. Check the area around the vehicle before entering it.
2. Adjust seat position, seatback angle, head restraint height and steering
wheel angle.
3. Adjust inside and outside rear view mirrors.
4. Lock all doors.
5. Fasten seat belts.
Remember to check that the service reminder indicators function when
turning the key to ºONº, and check the fuel gauge to see that you \
have
sufficient fuel.
IGNITION SWITCH WITH STEERING
LOCK
31E036
ºSTARTº ± Starter motor on. The key will return to the ºONº position
when released.
For starting tips, see page 136.
ºONº ± Engine on and all accessories on.
This is the normal driving position.
NOTICE
Do not leave the key in the ºONº position if the engine is not runni\
ng.
The battery will discharge and the electronic ignition system/distributo\
r
ignition system could be damaged.
ºACCº ± Accessories such as the radio operate, but the engine i\
s off.

STARTING AND DRIVING
136
HOW TO START THE ENGINE
Before cranking
1. Apply the parking brake firmly.
2. Turn off unnecessary lights and accessories.
3. Put the selector lever in ºPº. If you need to restart the engine \
while the
vehicle is moving, put the selector lever in ºNº. A starter safety devic\
e will
prevent the starter from operating if the selector lever is in any drive positi\
on.
4. Depress the brake pedal and hold it to the floor until you are ready to \
drive
off.
Starting the engine
Before starting the engine, be sure to follow the instructions in ºBefore
crankingº.
Normal starting procedure
The multiport fuel injection system/sequential multiport fuel injection sys\
tem
in your engine automatically controls the proper air±fuel mixture for s\
tarting.
You can start a cold or hot engine as follows:
1. With your foot off the accelerator pedal, crank the engine by turning the
key to ºSTARTº. Release it when the engine starts.
2. After the engine runs for about 10 seconds, you are ready to drive.If the weather is below freezing, let the engine warm up for a few minut\
es
before driving. Do not leave the vehicle while the engine is warming up.
If the engine stalls ...
Simply restart it , using the correct procedure given in normal starting\
.
If the engine will not start
See ºIf your vehicle will not startº on page 162.
NOTICE

Do not crank for more than 30 seconds at a time. This may overheat
the starter and wiring systems.
 Do not race a cold engine.
 If the engine becomes difficult to start or stalls frequently, have the
engine checked immediately.

STARTING AND DRIVING139
31E007±1

1On 2Off
2. Set the overdrive switch to the ON position.
Always set the overdrive switch to the ON position to improve fuel economy
and quiet driving. (See º(b) Using engine brakingº and º(f)\
Good driving
practiceº for exceptions.)
31E008

1 Brake pedal 2ºDº (Drive) position
3. With your foot holding down the brake pedal, shift the selector lever
to ºDº.
CAUTION
Never put your foot on the accelerator pedal while shifting.
4. Release the parking brake and brake pedal. Depress the accelerator
pedal slowly for smooth starting.
The vehicle will start in the first gear and automatically shift to the mos\
t
suitable gear for the running conditions, such as the vehicle speed, hill
climbing, hard towing, etc. However, while the engine coolant temperature
is low and the vehicle is traveling at low speed, the transmission will no\
t shift
into the overdrive gear even with the overdrive switch on.

SECTION 3 ± 2
151
STARTING AND DRIVING
Driving tips
Break±in period152
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . .
Operation in foreign countries 152
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . .
Tips for driving in various conditions s 152. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . .
Winter driving tips 153
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . .
Trailer towing 154
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . .
How to save fuel and make your vehicle last longer 159
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DRIVING TIPS
152
BREAK±IN PERIOD
Drive gently and avoid high speeds.
You need not follow a break±in schedule with your new Lexus. But follow\
ing
a few simple tips for the first 1600 km (1000 miles) can add to the fu\
ture
economy and long life of your vehicle:
Do not drive over 88 km/h (55 mph).
 Avoid overrevving. Maintain engine speed between 2000 and 4000 rpm.
 Avoid full±throttle starts.
 Try to avoid hard stops during the first 300 km (200 miles).
 Do not drive for a long time at any single speed, either fast or slow.
 Do not tow a trailer during the first 800 km (500 miles).
OPERATION IN FOREIGN COUNTRIES
If you plan to drive your Lexus in another country ...
First, comply with the vehicle registration laws.
Second, confirm the availability of the correct fuel (unleaded and minimum
octane rating).
TIPS FOR DRIVING IN VARIOUS CONDITIONS
Always slow down in gusty crosswinds. This will allow you much better
control.
 Drive slowly onto curbs and, if possible, at a right angle. Avoid driving
onto high, sharp±edged objects and other road hazards. Failure to do so can
lead to severe tire damage resulting in tire bursts.
 When parking on a hill, turn the front wheels until they touch the curb so
that the vehicle will not roll. Apply the parking brake, and place the
transmission in ºPº. If necessary, block the wheels.
 Washing your vehicle or driving through deep water may get the brakes
wet. To see whether they are wet, check that there is no traffic near you and
then press the pedal lightly. If you do not feel a normal braking force, the
brakes are probably wet. To dry them, drive the vehicle cautiously while
lightly pressing the brake pedal with the parking brake applied. If they still
do not work safely, pull to the side of the road and call a Lexus dealer for
assistance.