1998 HONDA PRELUDE lights

Maintenance

This section explains why it is important to keep your vehicle wellmaintained and to follow basic
maintenance safety precautions.
This section also includes Maintenance Schedules for normaldriving and severe driving conditions,
a Maintenance Record, and instruc-
tions for simple maintenance tasks
you may want to take care of
yourself.
If you have the skills and tools to per-
form more complex maintenance
tasks on your Honda, you may want to purchase the Service Manual. See
page 271 for information on how toobtain a copy, or see your Honda

dealer.
Maintenance Safety....................... 160
Important Safety Precautions ..161
Maintenance Schedule.................. 162
Required Maintenance Record.... 169 Owner Maintenance Checks........ 171
Fluid Locations............................... 172
Engine Oil.......................................173

Adding Oil................................... 173Recommended Oil..................... 173Synthetic Oil............................... 174

Additives..................................... 174
Changing the Oil and Filter...... 175
Cooling System.............................. 177
Adding Engine Coolant............. 177Replacing Engine Coolant........ 179
Windshield Washers..................... 182
Transmission Fluid........................ 183 AutomaticTransmission.......................... 183
5-speed Manual Transmission.......................... 184
Brake and Clutch Fluid................. 185 Brake System............................. 185
Clutch System............................ 186
Power Steering............................... 186
Air Cleaner Element...................... 187 Spark Plugs..................................... 188
Replacement............................... 188
Specifications............................. 190
Battery............................................ 190
Wiper Blades.................................. 193
Air Conditioning System............... 195 Drive Belts...................................... 196
Timing Belt..................................... 196

Tires................................................ 197
Inflation....................................... 197

Inspection................................... 198

Maintenance............................... 199

Tire Rotation.............................. 200 Replacing Tires and Wheels .... 200
Wheels and Tires....................... 201

Winter Driving...........................201
Snow Tires.............................. 202

Tire Chains............................. 202

Lights.............................................. 203

Headlight Aimimg..................... 205

Replacing Bulbs......................... 206

Storing Your Vehicle..................... 217

MaintenanceProCarManuals.comMain Menu s t

Owner Maintenance Checks
You should check the following items at the specified intervals. If
you are unsure of how to perform any check, turn to the page given. Engine oil level — Check every
time you fill the fuel tank. See page 123. Engine coolant level — Check the
radiator reserve tank every time
you fill the fuel tank. See page 124.
Windshield washer fluid — Check
the level in the reservoir monthly.If weather conditions cause you to
use the washers frequently, check
the reservoir each time you stop
for fuel. See page 182. Automatic transmission — Check
the fluid level monthly. See page
183.
Brakes — Check the fluid level
monthly. See page 185. Tires — Check the tire pressure
monthly. Examine the tread for
wear and foreign objects. See page
197.

Lights — Check the operation of
the headlights, parking lights,
taillights, high-mount brake light,
turn signals, brake lights, and
license plate lights monthly. See

page 203.

MaintenanceProCarManuals.comMain Menu Table of Contents s t

Lights

Check the operation of your vehicle's
exterior lights at least once a month.
A burned out bulb can create an unsafe condition by reducing your
vehicle's visibility and the ability to signal your intentions to other
drivers.

CONTINUED

Maintenance
PARKING LIGHT
HEADLIGHT LOW BEAM
SIDE MARKER LIGHT
HEADLIGHT HIGH BEAM
TURN SIGNALProCarManuals.comMain Menu Table of Contents s t

Lights

Check the following:
Headlights (low and high beam)
Parking lights Taillights
Brake lights
High-mount brake light
Turn signals
Back-up lights
Hazard light function
License plate light
Side marker lights
Daytime running lights
(Canadian models)
If you find any bulbs are burned out,

replace them as soon as possible.
Refer to the chart on page 255 to

determine what type of replacement

bulb is needed.

Maintenance TAILLIGHT/BRAKE LIGHT
HIGH-MOUNT BRAKE LIGHT

TAILLIGHT

BACK-UP LIGHT
LICENSE PLATE LIGHT
TURN SIGNAL
SIDE MARKER LIGHTProCarManuals.comMain Menu Table of Contents s t

Lights

Headlight Aiming
The headlights were properly aimed
when your vehicle was new. You should check their aim if you
regularly carry heavy items in the
trunk or pull a trailer. Each headlight
assembly has horizontal and vertical
adjustment indicators. These are set to their "0" positions after the
headlights are aimed at the factory.
To check these settings:
1. Make sure the fuel tank is full. Park the vehicle on level ground.
2. The driver or someone who weighs the same should be sitting
in the driver's seat for all checks
and adjustments.Load the trunk with the items you
normally carry. If you usually pull a trailer, load it as
you would normally and attach it to the vehicle. Push down on the frontand rear bumpers several times tomake sure the vehicle is sitting
normally.
3. Open the hood.
4. Check the horizontal angle gauge. The line on the adjustment screwindicator should line up with the"0" mark on the gauge. 5. Check the vertical angle gauge.
The bubble should be centeredunderneath the longest scribe
mark on the gauge.

CONTINUED

Maintenance
HORIZONTAL ANGLE GAUGE

BUBBLE

VERTICAL ANGLE GAUGEProCarManuals.comMain Menu Table of Contents s t

Lights

6. If either indicator is not aligned
with its "0" mark as described, an adjustment ca

n be made using a
Phillips-head

screwdriver to
realign it with the "0" mark. Please
refer t
o the illustrations. 7. I
f you cannot get an indicator to
align,

have your Honda dealer
inspect the vehicle for body

damage or suspension problems.
Replacing a Headlight Bulb
Your ca

r has two bulbs on each side,
four in total. Make sure you are replacing
the bulb that is burned out.
Your ca

r uses halogen headlight
bulbs. When replacing a bulb, handle it by its plastic case and protect the
glass

from contact with your skin or
hard

objects. If you touch the glass,
clea

n it with denatured alcohol and a
clean

cloth.
The headlight bulbs in your car are H1 headlight bulbs for
longer life.
We recommend the use of Genuine Honda parts for replacing a
headlight bulb.

Halogen headlight bulbs get very hot when lit. Oil, perspiration, or a scratch
on the glass can
cause the bulb to
overheat and shatter.

Maintenance

HORIZONTAL ADJUSTMENT


VERTICAL ADJUSTMENT

NOTICE
ProCarManuals.comMain Menu Table of Contents s t

Lights

1. Open the hood.
2. Remove the electrical connector from the bulb by squeezing the
connector on both sides to unlock
the tab. Pull the connector straight
off.

3. Remove the rubber weather sealby pulling on the tab.
4. Unclip the end of the hold-down wire from its slot. Pivot it out ofthe way and remove the bulb.
5. Insert the new bulb into the hole,
making sure the tabs are in theirslots. Pivot the hold-down wire
back in place and clip the end into
the slot.
6. Install the rubber seal over the back of the headlight assembly.Make sure it is right side up; it is

marked "TOP".

7. Push the electrical connector onto the tabs of the new bulb. Makesure it locks in place.
Turn on the headlights to test the new bulb.
Maintenance

BULB

CONNECTOR

WEATHER SEAL

HOLD-

DOWN

WIREProCarManuals.comMain Menu Table of Contents s t

Lights

Replacing a Parking Light Bulb
1. Open the hood. The front parking light is next to the headlight bulb.
If you need to change a bulb on
the passenger's side, remove the radiator reserve tank by pulling it
out of its holder.
2. Remove the socket from theheadlight assembly by turning itone-quarter turn counterclockwise. 3. Pull the bulb straight out of its

socket.

Push the new bulb straight into
the socket until it bottoms.
4. Insert the socket back into the headlight assembly. Turn itclockwise to lock it in place.
5. Turn on the parking lights to make sure the new bulb works.
6. (Passenger's side) Reinstall the radiator reserve tank.

MaintenanceProCarManuals.comMain Menu Table of Contents s t